lkml.org 
[lkml]   [2022]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 20/22] firmware: arm_scmi: Add SCMIv3.1 VOLTAGE_LEVEL_SET_COMPLETE
Date
Add SCMIv3.1 Voltage protocol support for asynchronous VOLTAGE_LEVEL_SET
command.

Note that, if a Voltage domain is advertised to support the asynchronous
version of VOLTAGE_LEVEL_SET, the command will be issued asynchronously
unless explicitly requested to use the synchronous version by setting the
mode to SCMI_VOLTAGE_LEVEL_SET_SYNC when calling voltage_ops->level_set.

The SCMI Regulator driver level_set invocation has been left unchanged
so that it will transparently use the asynchronous version if available.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
drivers/firmware/arm_scmi/voltage.c | 51 ++++++++++++++++++++++++-----
include/linux/scmi_protocol.h | 12 +++++--
2 files changed, 51 insertions(+), 12 deletions(-)

diff --git a/drivers/firmware/arm_scmi/voltage.c b/drivers/firmware/arm_scmi/voltage.c
index e1bdce573c4f..9d195d8719ab 100644
--- a/drivers/firmware/arm_scmi/voltage.c
+++ b/drivers/firmware/arm_scmi/voltage.c
@@ -28,6 +28,7 @@ enum scmi_voltage_protocol_cmd {

struct scmi_msg_resp_domain_attributes {
__le32 attr;
+#define SUPPORTS_ASYNC_LEVEL_SET(x) ((x) & BIT(31))
#define SUPPORTS_EXTENDED_NAMES(x) ((x) & BIT(30))
u8 name[SCMI_SHORT_NAME_MAX_SIZE];
};
@@ -56,6 +57,11 @@ struct scmi_msg_cmd_level_set {
__le32 voltage_level;
};

+struct scmi_resp_voltage_level_set_complete {
+ __le32 domain_id;
+ __le32 voltage_level;
+};
+
struct voltage_info {
unsigned int version;
unsigned int num_domains;
@@ -214,6 +220,7 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
resp_dom = td->rx.buf;

for (dom = 0; dom < vinfo->num_domains; dom++) {
+ u32 attributes;
struct scmi_voltage_info *v;

/* Retrieve domain attributes at first ... */
@@ -225,18 +232,22 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,

v = vinfo->domains + dom;
v->id = dom;
- v->attributes = le32_to_cpu(resp_dom->attr);
+ attributes = le32_to_cpu(resp_dom->attr);
strlcpy(v->name, resp_dom->name, SCMI_MAX_STR_SIZE);

/*
* If supported overwrite short name with the extended one;
* on error just carry on and use already provided short name.
*/
- if (PROTOCOL_REV_MAJOR(vinfo->version) >= 0x2 &&
- SUPPORTS_EXTENDED_NAMES(v->attributes))
- ph->hops->extended_name_get(ph, VOLTAGE_DOMAIN_NAME_GET,
- v->id, v->name,
- SCMI_MAX_STR_SIZE);
+ if (PROTOCOL_REV_MAJOR(vinfo->version) >= 0x2) {
+ if (SUPPORTS_EXTENDED_NAMES(attributes))
+ ph->hops->extended_name_get(ph,
+ VOLTAGE_DOMAIN_NAME_GET,
+ v->id, v->name,
+ SCMI_MAX_STR_SIZE);
+ if (SUPPORTS_ASYNC_LEVEL_SET(attributes))
+ v->async_level_set = true;
+ }

ret = scmi_voltage_levels_get(ph, v);
/* Skip invalid voltage descriptors */
@@ -308,12 +319,15 @@ static int scmi_voltage_config_get(const struct scmi_protocol_handle *ph,
}

static int scmi_voltage_level_set(const struct scmi_protocol_handle *ph,
- u32 domain_id, u32 flags, s32 volt_uV)
+ u32 domain_id,
+ enum scmi_voltage_level_mode mode,
+ s32 volt_uV)
{
int ret;
struct scmi_xfer *t;
struct voltage_info *vinfo = ph->get_priv(ph);
struct scmi_msg_cmd_level_set *cmd;
+ struct scmi_voltage_info *v;

if (domain_id >= vinfo->num_domains)
return -EINVAL;
@@ -323,12 +337,31 @@ static int scmi_voltage_level_set(const struct scmi_protocol_handle *ph,
if (ret)
return ret;

+ v = vinfo->domains + domain_id;
+
cmd = t->tx.buf;
cmd->domain_id = cpu_to_le32(domain_id);
- cmd->flags = cpu_to_le32(flags);
cmd->voltage_level = cpu_to_le32(volt_uV);

- ret = ph->xops->do_xfer(ph, t);
+ if (!v->async_level_set || mode != SCMI_VOLTAGE_LEVEL_SET_AUTO) {
+ cmd->flags = cpu_to_le32(0x0);
+ ret = ph->xops->do_xfer(ph, t);
+ } else {
+ cmd->flags = cpu_to_le32(0x1);
+ ret = ph->xops->do_xfer_with_response(ph, t);
+ if (!ret) {
+ struct scmi_resp_voltage_level_set_complete *resp;
+
+ resp = t->rx.buf;
+ if (le32_to_cpu(resp->domain_id) == domain_id)
+ dev_dbg(ph->dev,
+ "Voltage domain %d set async to %d\n",
+ v->id,
+ le32_to_cpu(resp->voltage_level));
+ else
+ ret = -EPROTO;
+ }
+ }

ph->xops->xfer_put(ph, t);
return ret;
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 0e20acc80d50..1c58646ba381 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -495,6 +495,11 @@ struct scmi_reset_proto_ops {
int (*deassert)(const struct scmi_protocol_handle *ph, u32 domain);
};

+enum scmi_voltage_level_mode {
+ SCMI_VOLTAGE_LEVEL_SET_AUTO,
+ SCMI_VOLTAGE_LEVEL_SET_SYNC,
+};
+
/**
* struct scmi_voltage_info - describe one available SCMI Voltage Domain
*
@@ -507,7 +512,8 @@ struct scmi_reset_proto_ops {
* supported voltage level
* @negative_volts_allowed: True if any of the entries of @levels_uv represent
* a negative voltage.
- * @attributes: represents Voltage Domain advertised attributes
+ * @async_level_set: True when the voltage domain supports asynchronous level
+ * set commands.
* @name: name assigned to the Voltage Domain by platform
* @num_levels: number of total entries in @levels_uv.
* @levels_uv: array of entries describing the available voltage levels for
@@ -517,7 +523,7 @@ struct scmi_voltage_info {
unsigned int id;
bool segmented;
bool negative_volts_allowed;
- unsigned int attributes;
+ bool async_level_set;
char name[SCMI_MAX_STR_SIZE];
unsigned int num_levels;
#define SCMI_VOLTAGE_SEGMENT_LOW 0
@@ -548,7 +554,7 @@ struct scmi_voltage_proto_ops {
int (*config_get)(const struct scmi_protocol_handle *ph, u32 domain_id,
u32 *config);
int (*level_set)(const struct scmi_protocol_handle *ph, u32 domain_id,
- u32 flags, s32 volt_uV);
+ enum scmi_voltage_level_mode mode, s32 volt_uV);
int (*level_get)(const struct scmi_protocol_handle *ph, u32 domain_id,
s32 *volt_uV);
};
--
2.32.0
\
 
 \ /
  Last update: 2022-03-30 17:08    [W:1.012 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site