lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC 00/10] add support for fwnode in i2c mux system and sfp
On Tue, Feb 22, 2022 at 5:57 AM Andrew Lunn <andrew@lunn.ch> wrote:
>
> > This series has been tested on a x86 kernel build without CONFIG_OF.
> > Another kernel was also built with COMPILE_TEST and CONFIG_OF support
> > to build as most drivers as possible. It was also tested on a sparx5
> > arm64 with CONFIG_OF. However, it was not tested with an ACPI
> > description evolved enough to validate all the changes.
>
> By that, do you mean a DSD description?
>
> In the DT world, we avoid snow flakes. Once you define a binding, it
> is expected every following board will use it. So what i believe you
> are doing here is defining how i2c muxes are described in APCI.

Linux kernel has already established description of I2C muxes in ACPI:
https://www.kernel.org/doc/html/latest/firmware-guide/acpi/i2c-muxes.html

I'm not sure we want another one.

> How
> SFP devices are described in ACPI. Until the ACPI standards committee
> says otherwise, this is it. So you need to clearly document
> this. Please add to Documentation/firmware-guide/acpi/dsd.

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2022-02-22 09:28    [W:0.887 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site