lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 09/10] i2c: mux: add support for fwnode
On Tue, Feb 22, 2022 at 09:53:25AM +0100, Clément Léger wrote:
> Le Mon, 21 Feb 2022 19:55:25 +0200,
> Andy Shevchenko <andriy.shevchenko@linux.intel.com> a écrit :
>
> > On Mon, Feb 21, 2022 at 05:26:51PM +0100, Clément Léger wrote:
> > > Modify i2c_mux_add_adapter() to use with fwnode API to allow creating
> > > mux adapters with fwnode based devices. This allows to have a node
> > > independent support for i2c muxes.
> >
> > I^2C muxes have their own description for DT and ACPI platforms, I'm not sure
> > swnode should be used here at all. Just upload a corresponding SSDT overlay or
> > DT overlay depending on the platform. Can it be achieved?
> >
>
> Problem is that this PCIe card can be plugged either in a X86 platform
> using ACPI or on a ARM one with device-tree. So it means I should have
> two "identical" descriptions for each platforms.

ACPI != DT.

I know people like stuffing DT properties into ACPI tables, when ACPI
does not have a binding. But in this case, there is a well defined
ACPI mechanism for I2C muxes. You cannot ignore it because it is
different to DT. So you need to handle the muxes in both the ACPI way
and the DT way.

For other parts of what you are doing, you might be able to get away
by just stuffing DT properties into ACPI tables. But that is not for
me to decide, that is up to the ACPI maintainers.

Andrew

\
 
 \ /
  Last update: 2022-02-22 11:58    [W:0.163 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site