lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 09/10] i2c: mux: add support for fwnode
Le Mon, 21 Feb 2022 19:55:25 +0200,
Andy Shevchenko <andriy.shevchenko@linux.intel.com> a écrit :

> On Mon, Feb 21, 2022 at 05:26:51PM +0100, Clément Léger wrote:
> > Modify i2c_mux_add_adapter() to use with fwnode API to allow creating
> > mux adapters with fwnode based devices. This allows to have a node
> > independent support for i2c muxes.
>
> I^2C muxes have their own description for DT and ACPI platforms, I'm not sure
> swnode should be used here at all. Just upload a corresponding SSDT overlay or
> DT overlay depending on the platform. Can it be achieved?
>

Problem is that this PCIe card can be plugged either in a X86 platform
using ACPI or on a ARM one with device-tree. So it means I should have
two "identical" descriptions for each platforms.

--
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com

\
 
 \ /
  Last update: 2022-02-22 09:55    [W:0.063 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site