lkml.org 
[lkml]   [2022]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/11] usb: host: xhci-tegra: Add Tegra234 XHCI support
On Mon, Oct 24, 2022 at 03:41:27PM +0800, Wayne Chang wrote:
> From: Sing-Han Chen <singhanc@nvidia.com>
>
> This change adds Tegra234 XUSB host mode controller support.
>
> In Tegra234, some of the registers have moved to bar2 space.
> The new soc variable has_bar2 indicates the chip with bar2
> area. This patch adds new reg helper to let the driver reuse
> the same code for those chips with bar2 support.
>
> The new soc variables has_ifr indicates the chip with IFR FW
> loading support. IFR registers would be configured in
> MB1, and FW loading will be triggered in MB2.
>
> Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
> Co-developed-by: Wayne Chang <waynec@nvidia.com>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> drivers/usb/host/xhci-tegra.c | 277 +++++++++++++++++++++++++++++-----
> 1 file changed, 237 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
> index bdb776553826..86036eeece43 100644
> --- a/drivers/usb/host/xhci-tegra.c
> +++ b/drivers/usb/host/xhci-tegra.c
> @@ -44,6 +44,9 @@
> #define XUSB_CFG_4 0x010
> #define XUSB_BASE_ADDR_SHIFT 15
> #define XUSB_BASE_ADDR_MASK 0x1ffff
> +#define XUSB_CFG_7 0x01c
> +#define XUSB_BASE2_ADDR_SHIFT 16
> +#define XUSB_BASE2_ADDR_MASK 0xffff
> #define XUSB_CFG_16 0x040
> #define XUSB_CFG_24 0x060
> #define XUSB_CFG_AXI_CFG 0x0f8
> @@ -75,6 +78,20 @@
> #define MBOX_SMI_INTR_FW_HANG BIT(1)
> #define MBOX_SMI_INTR_EN BIT(3)
>
> +/* BAR2 registers */
> +#define XUSB_BAR2_ARU_MBOX_CMD 0x004
> +#define XUSB_BAR2_ARU_MBOX_DATA_IN 0x008
> +#define XUSB_BAR2_ARU_MBOX_DATA_OUT 0x00c
> +#define XUSB_BAR2_ARU_MBOX_OWNER 0x010
> +#define XUSB_BAR2_ARU_SMI_INTR 0x014
> +#define XUSB_BAR2_ARU_SMI_ARU_FW_SCRATCH_DATA0 0x01c
> +#define XUSB_BAR2_ARU_IFRDMA_CFG0 0x0e0
> +#define XUSB_BAR2_ARU_IFRDMA_CFG1 0x0e4
> +#define XUSB_BAR2_ARU_IFRDMA_STREAMID_FIELD 0x0e8
> +#define XUSB_BAR2_ARU_C11_CSBRANGE 0x9c
> +#define XUSB_BAR2_ARU_FW_SCRATCH 0x1000
> +#define XUSB_BAR2_CSB_BASE_ADDR 0x2000
> +
> /* IPFS registers */
> #define IPFS_XUSB_HOST_MSI_BAR_SZ_0 0x0c0
> #define IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0 0x0c4
> @@ -111,6 +128,9 @@
> #define IMFILLRNG1_TAG_HI_SHIFT 16
> #define XUSB_FALC_IMFILLCTL 0x158
>
> +/* CSB ARU registers */

Weird double-space between "ARU" and "registers".

> +#define XUSB_CSB_ARU_SCRATCH0 0x100100
> +
> /* MP CSB registers */
> #define XUSB_CSB_MP_ILOAD_ATTR 0x101a00
> #define XUSB_CSB_MP_ILOAD_BASE_LO 0x101a04
> @@ -131,6 +151,9 @@
>
> #define IMEM_BLOCK_SIZE 256
>
> +#define FW_IOCTL_TYPE_SHIFT (24)

This should use tabs for spacing, like all the other definitions. Also,
no need to wrap literal integers in parentheses.

> +#define FW_IOCTL_CFGTBL_READ (17)

No need for the parentheses.

> +
> struct tegra_xusb_fw_header {
> __le32 boot_loadaddr_in_imem;
> __le32 boot_codedfi_offset;
> @@ -175,6 +198,7 @@ struct tegra_xusb_mbox_regs {
> u16 data_in;
> u16 data_out;
> u16 owner;
> + u16 smi_intr;
> };
>
> struct tegra_xusb_context_soc {
> @@ -189,6 +213,7 @@ struct tegra_xusb_context_soc {
> } fpci;
> };
>
> +struct tegra_xusb_soc_ops;

Probably better to move the definition of the structure here and instead
predeclare struct tegra_xusb.

> struct tegra_xusb_soc {
> const char *firmware;
> const char * const *supply_names;
> @@ -205,11 +230,15 @@ struct tegra_xusb_soc {
> } ports;
>
> struct tegra_xusb_mbox_regs mbox;
> + struct tegra_xusb_soc_ops *ops;

const please.

>
> bool scale_ss_clock;
> bool has_ipfs;
> bool lpm_support;
> bool otg_reset_sspi;
> +
> + bool has_bar2;
> + bool has_ifr;
> };
>
> struct tegra_xusb_context {
> @@ -230,6 +259,8 @@ struct tegra_xusb {
>
> void __iomem *ipfs_base;
> void __iomem *fpci_base;
> + void __iomem *bar2_base;
> + resource_size_t bar2_start;

Maybe just store struct resource *bar2, here.

[...]
> @@ -664,6 +754,7 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra,
> static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
> {
> struct tegra_xusb *tegra = data;
> + struct tegra_xusb_soc_ops *ops = tegra->soc->ops;

const

> @@ -709,6 +800,15 @@ static void tegra_xusb_config(struct tegra_xusb *tegra)
> value |= regs & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT);
> fpci_writel(tegra, value, XUSB_CFG_4);
>
> + /* Program BAR2 space */
> + if (tegra->soc->has_bar2) {

You could make this depend on tegra->bar2 if you make the change above.

> + value = fpci_readl(tegra, XUSB_CFG_7);
> + value &= ~(XUSB_BASE2_ADDR_MASK << XUSB_BASE2_ADDR_SHIFT);
> + value |= tegra->bar2_start &
> + (XUSB_BASE2_ADDR_MASK << XUSB_BASE2_ADDR_SHIFT);
> + fpci_writel(tegra, value, XUSB_CFG_7);
> + }
> +
> usleep_range(100, 200);
>
> /* Enable bus master */
> @@ -881,21 +981,36 @@ static int tegra_xusb_request_firmware(struct tegra_xusb *tegra)
> return 0;
> }
>
> +static int tegra_xusb_wait_for_falcon(struct tegra_xusb *tegra)
> +{
> + struct xhci_cap_regs __iomem *cap_regs;
> + struct xhci_op_regs __iomem *op_regs;
> + int ret;
> + u32 val;

Use "value" for consistency with the rest of the driver.

> +
> + cap_regs = tegra->regs;
> + op_regs = tegra->regs + HC_LENGTH(readl(&cap_regs->hc_capbase));
> +
> + ret = readl_poll_timeout(&op_regs->status, val, !(val & STS_CNR), 1000, 200000);
> +
> + if (ret)
> + dev_err(tegra->dev, "XHCI Controller not ready. Falcon state: 0x%x\n",
> + csb_readl(tegra, XUSB_FALC_CPUCTL));
> +
> + return ret;
> +}

This refactoring could be a separate patch. It makes the rest of the
changes harder to review. Not necessarily something that needs to be
addressed, though.

> +
> static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
> {
> unsigned int code_tag_blocks, code_size_blocks, code_blocks;
> - struct xhci_cap_regs __iomem *cap = tegra->regs;
> struct tegra_xusb_fw_header *header;
> struct device *dev = tegra->dev;
> - struct xhci_op_regs __iomem *op;
> - unsigned long timeout;
> time64_t timestamp;
> u64 address;
> u32 value;
> int err;
>
> header = (struct tegra_xusb_fw_header *)tegra->fw.virt;
> - op = tegra->regs + HC_LENGTH(readl(&cap->hc_capbase));
>
> if (csb_readl(tegra, XUSB_CSB_MP_ILOAD_BASE_LO) != 0) {
> dev_info(dev, "Firmware already loaded, Falcon state %#x\n",
> @@ -968,26 +1083,43 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
> /* Boot Falcon CPU and wait for USBSTS_CNR to get cleared. */
> csb_writel(tegra, CPUCTL_STARTCPU, XUSB_FALC_CPUCTL);
>
> - timeout = jiffies + msecs_to_jiffies(200);
> + if (tegra_xusb_wait_for_falcon(tegra))
> + return -EIO;
>
> - do {
> - value = readl(&op->status);
> - if ((value & STS_CNR) == 0)
> - break;
> + timestamp = le32_to_cpu(header->fwimg_created_time);
>
> - usleep_range(1000, 2000);
> - } while (time_is_after_jiffies(timeout));
> + dev_info(dev, "Firmware timestamp: %ptTs UTC\n", &timestamp);
> +
> + return 0;
> +}
>
> - value = readl(&op->status);
> - if (value & STS_CNR) {
> - value = csb_readl(tegra, XUSB_FALC_CPUCTL);
> - dev_err(dev, "XHCI controller not read: %#010x\n", value);
> +static u32 tegra_xusb_read_firmware_header(struct tegra_xusb *tegra, u32 offset)
> +{
> + /*
> + * We only accept reading the firmware config table
> + * The offset should not exceed the fw header structure
> + */
> + if (offset >= sizeof(struct tegra_xusb_fw_header))
> + return 0;

You technically still allow reading 3 bytes past the header structure.
Or does the firmware's CFGTL_READ IOCTL mask out the lower 2 bits of the
offset?

> +
> + bar2_writel(tegra, (FW_IOCTL_CFGTBL_READ << FW_IOCTL_TYPE_SHIFT) | offset,
> + XUSB_BAR2_ARU_FW_SCRATCH);
> + return bar2_readl(tegra, XUSB_BAR2_ARU_SMI_ARU_FW_SCRATCH_DATA0);
> +}
> +
> +static int tegra_xusb_init_ifr_firmware(struct tegra_xusb *tegra)
> +{
> + time64_t timestamp;
> +
> + if (tegra_xusb_wait_for_falcon(tegra))
> return -EIO;
> - }
>
> - timestamp = le32_to_cpu(header->fwimg_created_time);
> +#define offsetof_32(X, Y) ((u8)(offsetof(X, Y) / sizeof(__le32)))
> + timestamp = tegra_xusb_read_firmware_header(tegra,
> + offsetof_32(struct tegra_xusb_fw_header,
> + fwimg_created_time) << 2);
>
> - dev_info(dev, "Firmware timestamp: %ptTs UTC\n", &timestamp);
> + dev_info(tegra->dev, "Firmware timestamp: %ptTs UTC\n", &timestamp);
>
> return 0;
> }
> @@ -1403,7 +1535,7 @@ static int tegra_xusb_probe(struct platform_device *pdev)
> struct of_phandle_args args;
> struct tegra_xusb *tegra;
> struct device_node *np;
> - struct resource *regs;
> + struct resource *res, *regs;
> struct xhci_hcd *xhci;
> unsigned int i, j, k;
> struct phy *phy;
> @@ -1435,6 +1567,11 @@ static int tegra_xusb_probe(struct platform_device *pdev)
> tegra->ipfs_base = devm_platform_ioremap_resource(pdev, 2);
> if (IS_ERR(tegra->ipfs_base))
> return PTR_ERR(tegra->ipfs_base);
> + } else if (tegra->soc->has_bar2) {
> + tegra->bar2_base = devm_platform_get_and_ioremap_resource(pdev, 2, &res);

If you store struct resource *bar2 in tegra, you can pass &tegra->bar2
here and ...

> + if (IS_ERR(tegra->bar2_base))
> + return PTR_ERR(tegra->bar2_base);
> + tegra->bar2_start = res->start;

... skip this.

> }
>
> tegra->xhci_irq = platform_get_irq(pdev, 0);
> @@ -1651,10 +1788,13 @@ static int tegra_xusb_probe(struct platform_device *pdev)
> goto disable_phy;
> }
>
> - err = tegra_xusb_request_firmware(tegra);
> - if (err < 0) {
> - dev_err(&pdev->dev, "failed to request firmware: %d\n", err);
> - goto disable_phy;
> + if (!tegra->soc->has_ifr) {
> + err = tegra_xusb_request_firmware(tegra);
> + if (err < 0) {
> + dev_err(&pdev->dev,
> + "failed to request firmware: %d\n", err);
> + goto disable_phy;
> + }
> }
>
> err = tegra_xusb_unpowergate_partitions(tegra);
> @@ -1663,7 +1803,10 @@ static int tegra_xusb_probe(struct platform_device *pdev)
>
> tegra_xusb_config(tegra);
>
> - err = tegra_xusb_load_firmware(tegra);
> + if (tegra->soc->has_ifr)
> + err = tegra_xusb_init_ifr_firmware(tegra);
> + else
> + err = tegra_xusb_load_firmware(tegra);
> if (err < 0) {
> dev_err(&pdev->dev, "failed to load firmware: %d\n", err);
> goto powergate;
> @@ -2070,7 +2213,10 @@ static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool runtime)
> tegra_xusb_config(tegra);
> tegra_xusb_restore_context(tegra);
>
> - err = tegra_xusb_load_firmware(tegra);
> + if (tegra->soc->has_ifr)
> + err = tegra_xusb_init_ifr_firmware(tegra);
> + else
> + err = tegra_xusb_load_firmware(tegra);

Might be worth extracting this into a new function since you use this
twice now.

> if (err < 0) {
> dev_err(tegra->dev, "failed to load firmware: %d\n", err);
> goto disable_phy;
> @@ -2271,6 +2417,13 @@ static const struct tegra_xusb_context_soc tegra124_xusb_context = {
> },
> };
>
> +static struct tegra_xusb_soc_ops tegra124_ops = {

const

> + .mbox_reg_readl = &fpci_readl,
> + .mbox_reg_writel = &fpci_writel,
> + .csb_reg_readl = &fpci_csb_readl,
> + .csb_reg_writel = &fpci_csb_writel,
> +};
> +
> static const struct tegra_xusb_soc tegra124_soc = {
> .firmware = "nvidia/tegra124/xusb.bin",
> .supply_names = tegra124_supply_names,
> @@ -2286,11 +2439,13 @@ static const struct tegra_xusb_soc tegra124_soc = {
> .scale_ss_clock = true,
> .has_ipfs = true,
> .otg_reset_sspi = false,
> + .ops = &tegra124_ops,
> .mbox = {
> .cmd = 0xe4,
> .data_in = 0xe8,
> .data_out = 0xec,
> .owner = 0xf0,
> + .smi_intr = XUSB_CFG_ARU_SMI_INTR,
> },
> };
> MODULE_FIRMWARE("nvidia/tegra124/xusb.bin");
> @@ -2322,11 +2477,13 @@ static const struct tegra_xusb_soc tegra210_soc = {
> .scale_ss_clock = false,
> .has_ipfs = true,
> .otg_reset_sspi = true,
> + .ops = &tegra124_ops,
> .mbox = {
> .cmd = 0xe4,
> .data_in = 0xe8,
> .data_out = 0xec,
> .owner = 0xf0,
> + .smi_intr = XUSB_CFG_ARU_SMI_INTR,
> },
> };
> MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
> @@ -2363,11 +2520,13 @@ static const struct tegra_xusb_soc tegra186_soc = {
> .scale_ss_clock = false,
> .has_ipfs = false,
> .otg_reset_sspi = false,
> + .ops = &tegra124_ops,
> .mbox = {
> .cmd = 0xe4,
> .data_in = 0xe8,
> .data_out = 0xec,
> .owner = 0xf0,
> + .smi_intr = XUSB_CFG_ARU_SMI_INTR,
> },
> .lpm_support = true,
> };
> @@ -2394,21 +2553,59 @@ static const struct tegra_xusb_soc tegra194_soc = {
> .scale_ss_clock = false,
> .has_ipfs = false,
> .otg_reset_sspi = false,
> + .ops = &tegra124_ops,
> .mbox = {
> .cmd = 0x68,
> .data_in = 0x6c,
> .data_out = 0x70,
> .owner = 0x74,
> + .smi_intr = XUSB_CFG_ARU_SMI_INTR,
> },
> .lpm_support = true,
> };
> MODULE_FIRMWARE("nvidia/tegra194/xusb.bin");
>
> +static struct tegra_xusb_soc_ops tegra234_ops = {

const

> + .mbox_reg_readl = &bar2_readl,
> + .mbox_reg_writel = &bar2_writel,
> + .csb_reg_readl = &bar2_csb_readl,
> + .csb_reg_writel = &bar2_csb_writel,
> +};
> +
> +static const struct tegra_xusb_soc tegra234_soc = {
> + .firmware = "nvidia/tegra234/xusb.bin",
> + .supply_names = tegra194_supply_names,
> + .num_supplies = ARRAY_SIZE(tegra194_supply_names),
> + .phy_types = tegra194_phy_types,
> + .num_types = ARRAY_SIZE(tegra194_phy_types),
> + .context = &tegra186_xusb_context,
> + .ports = {
> + .usb3 = { .offset = 0, .count = 4, },
> + .usb2 = { .offset = 4, .count = 4, },
> + },
> + .scale_ss_clock = false,
> + .has_ipfs = false,
> + .otg_reset_sspi = false,
> + .ops = &tegra234_ops,
> + .mbox = {
> + .cmd = XUSB_BAR2_ARU_MBOX_CMD,
> + .data_in = XUSB_BAR2_ARU_MBOX_DATA_IN,
> + .data_out = XUSB_BAR2_ARU_MBOX_DATA_OUT,
> + .owner = XUSB_BAR2_ARU_MBOX_OWNER,
> + .smi_intr = XUSB_BAR2_ARU_SMI_INTR,
> + },
> + .lpm_support = true,
> + .has_bar2 = true,
> + .has_ifr = true,
> +};
> +MODULE_FIRMWARE("nvidia/tegra234/xusb.bin");

Can you prepare a patch to add this firmware to the linux-firmware
repository? I don't see it there yet.

Thierry

> +
> static const struct of_device_id tegra_xusb_of_match[] = {
> { .compatible = "nvidia,tegra124-xusb", .data = &tegra124_soc },
> { .compatible = "nvidia,tegra210-xusb", .data = &tegra210_soc },
> { .compatible = "nvidia,tegra186-xusb", .data = &tegra186_soc },
> { .compatible = "nvidia,tegra194-xusb", .data = &tegra194_soc },
> + { .compatible = "nvidia,tegra234-xusb", .data = &tegra234_soc },
> { },
> };
> MODULE_DEVICE_TABLE(of, tegra_xusb_of_match);
> --
> 2.25.1
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-10-28 15:42    [W:0.543 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site