lkml.org 
[lkml]   [2022]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 02/11] dt-bindings: usb: Add NVIDIA Tegra XUSB host controller binding
On Mon, Oct 24, 2022 at 03:41:19PM +0800, Wayne Chang wrote:
> Add device-tree binding documentation for the XUSB host controller present
> on Tegra194 and Tegra234 SoC. This controller supports the USB 3.1
> specification.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> .../bindings/usb/nvidia,tegra-xhci.yaml | 213 ++++++++++++++++++
> 1 file changed, 213 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra-xhci.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xhci.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xhci.yaml
> new file mode 100644
> index 000000000000..d261a419a04f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xhci.yaml
> @@ -0,0 +1,213 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xhci.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Device tree binding for NVIDIA Tegra XUSB host controller

Drop 'Device tree binding for '

> +
> +description:
> + The Tegra XHCI controller supports both USB 2.0 HighSpeed/FullSpeed and
> + USB 3.1 SuperSpeed protocols.
> +
> +maintainers:
> + - Wayne Chang <waynec@nvidia.com>
> +

Ref to usb-xhci.yaml? Or usb-hcd.yaml.

> +properties:
> + compatible:
> + items:
> + - enum:
> + - nvidia,tegra194-xusb # For Tegra194
> + - nvidia,tegra234-xusb # For Tegra234

The comment is kind of redundant.

> +
> + reg:
> + minItems: 2
> + items:
> + - description: XUSB host controller registers
> + - description: XUSB host PCI Config registers
> + - description: XUSB host bar2 registers

Drop 'XUSB host '

> +
> + reg-names:
> + minItems: 2
> + items:
> + - const: hcd
> + - const: fpci
> + - const: bar2
> +
> + interrupts:
> + items:
> + - description: Must contain the XUSB host interrupt.
> + - description: Must contain the XUSB mbox interrupt.

Drop 'Must contain the '

> +
> + clocks:
> + items:
> + - description: Clock to enable core XUSB host clock.
> + - description: Clock to enable XUSB falcon clock.
> + - description: Clock to enable XUSB super speed clock.
> + - description: Clock to enable XUSB super speed dev clock.
> + - description: Clock to enable XUSB high speed dev clock.
> + - description: Clock to enable XUSB full speed dev clock.
> + - description: Clock to enable XUSB UTMI PLL clock.
> + - description: Clock to enable core XUSB dev clock.
> + - description: Clock to enable XUSB PLLE clock.

Drop 'Clock to enable '

> +
> + clock-names:
> + items:
> + - const: xusb_host
> + - const: xusb_falcon_src
> + - const: xusb_ss
> + - const: xusb_ss_src
> + - const: xusb_hs_src
> + - const: xusb_fs_src
> + - const: pll_u_480m
> + - const: clk_m
> + - const: pll_e
> +
> + interconnects:
> + items:
> + - description: memory read client
> + - description: memory write client
> +
> + interconnect-names:
> + items:
> + - const: dma-mem # read
> + - const: write
> +
> + iommus:
> + maxItems: 1
> +
> + power-domains:
> + items:
> + - description: XUSBC(host) power-domain
> + - description: XUSBA(superspeed) power-domain
> +
> + power-domain-names:
> + items:
> + - const: xusb_host
> + - const: xusb_ss

Drop 'xusb_'.

> +
> + nvidia,xusb-padctl:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to the XUSB pad controller that is used to configure the USB pads
> + used by the XUDC controller.
> +
> + phys:
> + minItems: 1
> + maxItems: 8
> + description:
> + Must contain an entry for each entry in phy-names.
> + See ../phy/phy-bindings.txt for details.

Drop description.

> +
> + phy-names:
> + minItems: 1
> + maxItems: 8
> + items:
> + anyOf:
> + - const: usb2-0
> + - const: usb2-1
> + - const: usb2-2
> + - const: usb2-3
> + - const: usb3-0
> + - const: usb3-1
> + - const: usb3-2
> + - const: usb3-3
> +
> + dma-coherent:
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - clocks
> + - clock-names
> + - power-domains
> + - power-domain-names
> + - nvidia,xusb-padctl
> + - phys
> + - phy-names
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nvidia,tegra194-xusb
> + then:
> + properties:
> + reg:
> + minItems: 2
> + reg-names:
> + minItems: 2
> + clocks:
> + minItems: 9
> + clock-names:
> + minItems: 9
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nvidia,tegra234-xusb
> + then:
> + properties:
> + reg:
> + minItems: 3
> + reg-names:
> + minItems: 3
> + clocks:
> + minItems: 9
> + clock-names:
> + minItems: 9

Same number of items, why are clocks in the if/then?

> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/tegra234-gpio.h>
> + #include <dt-bindings/clock/tegra234-clock.h>
> + #include <dt-bindings/memory/tegra234-mc.h>
> + #include <dt-bindings/power/tegra234-powergate.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + usb@3610000 {
> + compatible = "nvidia,tegra234-xusb";
> + reg = <0x03610000 0x40000>,
> + <0x03600000 0x10000>,
> + <0x03650000 0x10000>;
> + reg-names = "hcd", "fpci", "bar2";
> +
> + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
> + <&bpmp TEGRA234_CLK_XUSB_FALCON>,
> + <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
> + <&bpmp TEGRA234_CLK_XUSB_SS>,
> + <&bpmp TEGRA234_CLK_CLK_M>,
> + <&bpmp TEGRA234_CLK_XUSB_FS>,
> + <&bpmp TEGRA234_CLK_UTMIP_PLL>,
> + <&bpmp TEGRA234_CLK_CLK_M>,
> + <&bpmp TEGRA234_CLK_PLLE>;
> + clock-names = "xusb_host", "xusb_falcon_src",
> + "xusb_ss", "xusb_ss_src", "xusb_hs_src",
> + "xusb_fs_src", "pll_u_480m", "clk_m",
> + "pll_e";
> + interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
> + <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
> + interconnect-names = "dma-mem", "write";
> + iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
> +
> + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
> + <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
> + power-domain-names = "xusb_host", "xusb_ss";
> +
> + nvidia,xusb-padctl = <&xusb_padctl>;
> +
> + phys = <&pad_lanes_usb2_0>;
> + phy-names = "usb2-0";
> +
> + };
> --
> 2.25.1
>
>

\
 
 \ /
  Last update: 2022-10-24 18:12    [W:0.369 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site