lkml.org 
[lkml]   [2022]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 03/11] dt-bindings: usb: Add binding for Cypress cypd4226 I2C driver
From

On 28/10/2022 13:31, Thierry Reding wrote:
> On Wed, Oct 26, 2022 at 08:13:57AM +0100, Jon Hunter wrote:
>>
>> On 24/10/2022 08:41, Wayne Chang wrote:
>>> add device-tree binding documentation for Cypress cypd4226 type-C
>>> controller's I2C interface. It is a standard i2c slave with GPIO
>>> input as IRQ interface.
>>>
>>> Signed-off-by: Wayne Chang <waynec@nvidia.com>
>>> ---
>>> .../bindings/usb/cypress,cypd4226.yaml | 86 +++++++++++++++++++
>>> 1 file changed, 86 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
>>> new file mode 100644
>>> index 000000000000..5ac28ab4e7a1
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
>>> @@ -0,0 +1,86 @@
>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Cypress cypd4226 UCSI I2C Type-C Controller
>>> +
>>> +maintainers:
>>> + - Wayne Chang <waynec@nvidia.com>
>>> +
>>> +description: |
>>> + The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface type-C
>>> + controller.
>>> +
>>> +properties:
>>> + compatible:
>>> + const: cypress,cypd4226
>>> +
>>> + '#address-cells':
>>> + const: 1
>>> +
>>> + '#size-cells':
>>> + const: 0
>>> +
>>> + reg:
>>> + const: 0x08
>>> +
>>> + interrupts:
>>> + maxItems: 1
>>> +
>>> + cypress,firmware-build:
>>> + enum:
>>> + - nv
>>> + - gn
>>> + description: |
>>> + the name of the CCGx firmware built for product series.
>>> + should be set one of following:
>>> + - "nv" for the RTX product series
>>
>> Please add 'NVIDIA' so that it is 'for the NVIDIA RTX product series'
>>
>>> + - "gn" for the Jetson product series
>>
>> Same here please add 'NVIDIA' so that it is 'for the NVIDIA Jetson product
>> series'.
>>
>> Rob, any concerns about this property in general? Unfortunately, ACPI choose
>> a 16-bit type for this and used 'nv' for the RTX product. I don't find 'gn'
>> for Jetson very descriptive but we need a way to differentiate from RTX.
>>
>> This is needed in the Cypress CCGX driver for the following ...
>>
>> https://lore.kernel.org/lkml/20220928150840.3804313-1-waynec@nvidia.com/
>>
>> Ideally, this should have been included in this series but was sent before.
>> We can always re-work/update the above patch even though it has been queued
>> up now.
>
> The driver seems to use this 16-bit value only to compare with a
> corresponding field in the firmware headers. How exactly we obtain this
> value is therefore not important. However, since this 16-bit value is
> embedded in firmware images, we also cannot substitute them with
> something more sensible.

I am actually wondering if this is actually embedded in any images
because I see it populated by the i2c-nvidia-gpu.c driver [0]. So I am
wondering if we can use PROPERTY_ENTRY_STRING() for this driver instead
and have a more descriptive name such as 'nvidia,rtx'?

Jon

[0]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/i2c/busses/i2c-nvidia-gpu.c#n261
--
nvpublic

\
 
 \ /
  Last update: 2022-10-28 14:43    [W:0.070 / U:1.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site