lkml.org 
[lkml]   [2021]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 558/593] serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
Date
From: Pali Rohár <pali@kernel.org>

[ Upstream commit ecd6b010d81f97b06b2f64d2d4f50ebf5acddaa9 ]

Testing mvuart->clk for non-error is not enough as mvuart->clk may contain
valid clk pointer but when clk_prepare_enable(mvuart->clk) failed then
port->uartclk is zero.

When mvuart->clk is not available then port->uartclk is zero too.

Parent clock rate port->uartclk is needed to calculate UART clock divisor
and without it is not possible to change baudrate.

So fix test condition when it is possible to change baudrate.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
Link: https://lore.kernel.org/r/20210624224909.6350-3-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/mvebu-uart.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 908a4ac6b5a7..9638ae6aae79 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -445,12 +445,11 @@ static void mvebu_uart_shutdown(struct uart_port *port)

static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
{
- struct mvebu_uart *mvuart = to_mvuart(port);
unsigned int d_divisor, m_divisor;
u32 brdv, osamp;

- if (IS_ERR(mvuart->clk))
- return -PTR_ERR(mvuart->clk);
+ if (!port->uartclk)
+ return -EOPNOTSUPP;

/*
* The baudrate is derived from the UART clock thanks to two divisors:
--
2.30.2


\
 
 \ /
  Last update: 2021-07-12 09:19    [W:1.599 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site