lkml.org 
[lkml]   [2021]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.10 106/593] media: am437x: fix pm_runtime_get_sync() usage count
    Date
    From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

    [ Upstream commit c41e02493334985cca1a22efd5ca962ce3abb061 ]

    The pm_runtime_get_sync() internally increments the
    dev->power.usage_count without decrementing it, even on errors.
    Replace it by the new pm_runtime_resume_and_get(), introduced by:
    commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
    in order to properly decrement the usage counter, avoiding
    a potential PM usage counter leak.

    While here, ensure that the driver will check if PM runtime
    resumed at vpfe_initialize_device().

    Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
    Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/media/platform/am437x/am437x-vpfe.c | 15 +++++++++++++--
    1 file changed, 13 insertions(+), 2 deletions(-)

    diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
    index 0fb9f9ba1219..31cee69adbe1 100644
    --- a/drivers/media/platform/am437x/am437x-vpfe.c
    +++ b/drivers/media/platform/am437x/am437x-vpfe.c
    @@ -1021,7 +1021,9 @@ static int vpfe_initialize_device(struct vpfe_device *vpfe)
    if (ret)
    return ret;

    - pm_runtime_get_sync(vpfe->pdev);
    + ret = pm_runtime_resume_and_get(vpfe->pdev);
    + if (ret < 0)
    + return ret;

    vpfe_config_enable(&vpfe->ccdc, 1);

    @@ -2443,7 +2445,11 @@ static int vpfe_probe(struct platform_device *pdev)
    pm_runtime_enable(&pdev->dev);

    /* for now just enable it here instead of waiting for the open */
    - pm_runtime_get_sync(&pdev->dev);
    + ret = pm_runtime_resume_and_get(&pdev->dev);
    + if (ret < 0) {
    + vpfe_err(vpfe, "Unable to resume device.\n");
    + goto probe_out_v4l2_unregister;
    + }

    vpfe_ccdc_config_defaults(ccdc);

    @@ -2530,6 +2536,11 @@ static int vpfe_suspend(struct device *dev)

    /* only do full suspend if streaming has started */
    if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
    + /*
    + * ignore RPM resume errors here, as it is already too late.
    + * A check like that should happen earlier, either at
    + * open() or just before start streaming.
    + */
    pm_runtime_get_sync(dev);
    vpfe_config_enable(ccdc, 1);

    --
    2.30.2


    \
     
     \ /
      Last update: 2021-07-12 09:10    [W:4.042 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site