lkml.org 
[lkml]   [2021]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 345/593] wcn36xx: Move hal_buf allocation to devm_kmalloc in probe
Date
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

[ Upstream commit ef48667557c53d4b51a1ee3090eab7699324c9de ]

Right now wcn->hal_buf is allocated in wcn36xx_start(). This is a problem
since we should have setup all of the buffers we required by the time
ieee80211_register_hw() is called.

struct ieee80211_ops callbacks may run prior to mac_start() and therefore
wcn->hal_buf must be initialized.

This is easily remediated by moving the allocation to probe() taking the
opportunity to tidy up freeing memory by using devm_kmalloc().

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605173347.2266003-1-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wcn36xx/main.c | 21 ++++++++-------------
1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 706728fba72d..9f8e44210e89 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -293,23 +293,16 @@ static int wcn36xx_start(struct ieee80211_hw *hw)
goto out_free_dxe_pool;
}

- wcn->hal_buf = kmalloc(WCN36XX_HAL_BUF_SIZE, GFP_KERNEL);
- if (!wcn->hal_buf) {
- wcn36xx_err("Failed to allocate smd buf\n");
- ret = -ENOMEM;
- goto out_free_dxe_ctl;
- }
-
ret = wcn36xx_smd_load_nv(wcn);
if (ret) {
wcn36xx_err("Failed to push NV to chip\n");
- goto out_free_smd_buf;
+ goto out_free_dxe_ctl;
}

ret = wcn36xx_smd_start(wcn);
if (ret) {
wcn36xx_err("Failed to start chip\n");
- goto out_free_smd_buf;
+ goto out_free_dxe_ctl;
}

if (!wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) {
@@ -336,8 +329,6 @@ static int wcn36xx_start(struct ieee80211_hw *hw)

out_smd_stop:
wcn36xx_smd_stop(wcn);
-out_free_smd_buf:
- kfree(wcn->hal_buf);
out_free_dxe_ctl:
wcn36xx_dxe_free_ctl_blks(wcn);
out_free_dxe_pool:
@@ -372,8 +363,6 @@ static void wcn36xx_stop(struct ieee80211_hw *hw)

wcn36xx_dxe_free_mem_pools(wcn);
wcn36xx_dxe_free_ctl_blks(wcn);
-
- kfree(wcn->hal_buf);
}

static void wcn36xx_change_ps(struct wcn36xx *wcn, bool enable)
@@ -1398,6 +1387,12 @@ static int wcn36xx_probe(struct platform_device *pdev)
mutex_init(&wcn->hal_mutex);
mutex_init(&wcn->scan_lock);

+ wcn->hal_buf = devm_kmalloc(wcn->dev, WCN36XX_HAL_BUF_SIZE, GFP_KERNEL);
+ if (!wcn->hal_buf) {
+ ret = -ENOMEM;
+ goto out_wq;
+ }
+
ret = dma_set_mask_and_coherent(wcn->dev, DMA_BIT_MASK(32));
if (ret < 0) {
wcn36xx_err("failed to set DMA mask: %d\n", ret);
--
2.30.2


\
 
 \ /
  Last update: 2021-07-12 09:10    [W:2.030 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site