lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 086/132] mtd: rawnand: fsmc: Take instruction delay into account
Date
From: Herve Codina <herve.codina@bootlin.com>

commit a4ca0c439f2d5ce9a3dc118d882f9f03449864c8 upstream.

The FSMC NAND controller should apply a delay after the
instruction has been issued on the bus.
The FSMC NAND controller driver did not handle this delay.

Add this waiting delay in the FSMC NAND controller driver.

Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/nand/raw/fsmc_nand.c | 4 ++++
1 file changed, 4 insertions(+)

--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -15,6 +15,7 @@

#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/dma-mapping.h>
@@ -653,6 +654,9 @@ static int fsmc_exec_op(struct nand_chip
instr->ctx.waitrdy.timeout_ms);
break;
}
+
+ if (instr->delay_ns)
+ ndelay(instr->delay_ns);
}

return ret;

\
 
 \ /
  Last update: 2021-12-13 11:10    [W:0.847 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site