lkml.org 
[lkml]   [2020]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 384/453] powerpc/8xx: Fix early debug when SMC1 is relocated
Date
From: Christophe Leroy <christophe.leroy@csgroup.eu>

commit 1e78f723d6a52966bfe3804209dbf404fdc9d3bb upstream.

When SMC1 is relocated and early debug is selected, the
board hangs is ppc_md.setup_arch(). This is because ones
the microcode has been loaded and SMC1 relocated, early
debug writes in the weed.

To allow smooth continuation, the SMC1 parameter RAM set up
by the bootloader have to be copied into the new location.

Fixes: 43db76f41824 ("powerpc/8xx: Add microcode patch to move SMC parameter RAM.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b2f71f39eca543f1e4ec06596f09a8b12235c701.1607076683.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/powerpc/include/asm/cpm1.h | 1 +
arch/powerpc/platforms/8xx/micropatch.c | 11 +++++++++++
2 files changed, 12 insertions(+)

--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -68,6 +68,7 @@ extern void cpm_reset(void);
#define PROFF_SPI ((uint)0x0180)
#define PROFF_SCC3 ((uint)0x0200)
#define PROFF_SMC1 ((uint)0x0280)
+#define PROFF_DSP1 ((uint)0x02c0)
#define PROFF_SCC4 ((uint)0x0300)
#define PROFF_SMC2 ((uint)0x0380)

--- a/arch/powerpc/platforms/8xx/micropatch.c
+++ b/arch/powerpc/platforms/8xx/micropatch.c
@@ -361,6 +361,17 @@ void __init cpm_load_patch(cpm8xx_t *cp)
if (IS_ENABLED(CONFIG_SMC_UCODE_PATCH)) {
smc_uart_t *smp;

+ if (IS_ENABLED(CONFIG_PPC_EARLY_DEBUG_CPM)) {
+ int i;
+
+ for (i = 0; i < sizeof(*smp); i += 4) {
+ u32 __iomem *src = (u32 __iomem *)&cp->cp_dparam[PROFF_SMC1 + i];
+ u32 __iomem *dst = (u32 __iomem *)&cp->cp_dparam[PROFF_DSP1 + i];
+
+ out_be32(dst, in_be32(src));
+ }
+ }
+
smp = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC1];
out_be16(&smp->smc_rpbase, 0x1ec0);
smp = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC2];

\
 
 \ /
  Last update: 2020-12-28 14:56    [W:0.879 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site