lkml.org 
[lkml]   [2014]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/4] ARM: dove: move Dove DT to MVEBU
On Thu, Feb 27, 2014 at 10:28:01PM +0100, Sebastian Hesselbarth wrote:
> Thanks to DT conversion effort, Marvell Dove with DT support is now
> ready to leave mach-dove and hop into mach-mvebu. As discussed with
> MVEBU maintainers, we first add dove.c now and keep on migrating
> it with Armada 3xx SoCs the next cycle.
>
> Patch 1 adds a DT node for the system controller found on Marvell
> MVEBU SoCs.
>
> Patch 2 copies an approach taken by Andrew Lunn for Kirkwood-to-MVEBU
> patches, that add MACH_DOVE for Dove in mach-mvebu to distinguish it
> from ARCH_DOVE in mach-dove, where drivers still support both non-DT
> and DT.
>
> Patch 3 then moves mach-dove/board-dt.c to mach-mvebu/dove.c with
> minor cleanups and converts drivers/phy/Kconfig to MACH_DOVE for
> a DT-only driver.
>
> Patch 4 finally adds MACH_DOVE and some of its drivers to multi_v7
> defconfig.
>
> The patches are based on v3.14-rc4, recently posted mvebu/pinctrl-cleanup
> and mvebu/pinctrl-dove branches: v3.14-rc4 is required for a irqchip
> driver fix when SPARSE_IRQ is set, the pinctrl branches remove hard-coded
> addresses from Dove's pinctrl driver.

If I were to base this series on v3.14-rc1, I would need to pull in

mvebu/pinctrl-dove (which draws in mvebu/pinctrl-cleanup)
mvebu/irqchip-fixes

and that should be all. iiuc, these are boot-time requirements, not
build or merge requirements, correct?

thx,

Jason.

> An unstable branch with above dependencies met, is available at
>
> https://github.com/shesselba/linux-dove.git unstable/dove-mvebu-for-3.15_v1
>
> Sebastian Hesselbarth (4):
> ARM: dove: add system controller node
> ARM: dove: prepare new Dove DT Kconfig variable
> ARM: mvebu: move DT Dove to MVEBU
> ARM: add Marvell Dove and some drivers to multi_v7 defconfig
>
> arch/arm/boot/dts/Makefile | 12 ++++++------
> arch/arm/boot/dts/dove.dtsi | 5 +++++
> arch/arm/configs/multi_v7_defconfig | 4 ++++
> arch/arm/mach-dove/Kconfig | 12 ------------
> arch/arm/mach-dove/Makefile | 1 -
> arch/arm/mach-mvebu/Kconfig | 12 ++++++++++++
> arch/arm/mach-mvebu/Makefile | 1 +
> arch/arm/{mach-dove/board-dt.c => mach-mvebu/dove.c} | 20 ++++++++------------
> drivers/mmc/host/Kconfig | 2 +-
> drivers/phy/Kconfig | 2 +-
> drivers/thermal/Kconfig | 2 +-
> drivers/watchdog/Kconfig | 2 +-
> sound/soc/kirkwood/Kconfig | 2 +-
> 13 files changed, 41 insertions(+), 36 deletions(-)
> rename arch/arm/{mach-dove/board-dt.c => mach-mvebu/dove.c} (61%)
>
> ---
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Gregory Clement <gregory.clement@free-electrons.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> --
> 1.8.5.3
>


\
 
 \ /
  Last update: 2014-02-28 06:43    [W:0.216 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site