lkml.org 
[lkml]   [2024]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 09/21] arm64: dts: qcom: sc8280xp: Add PCIe bridge node
From
On 21.02.2024 04:41, Manivannan Sadhasivam wrote:
> On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
> for each controller instance. Hence, add a node to represent the bridge.
>
> While at it, let's remove the bridge properties from board dts as they are
> now redundant.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 8 -----
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 40 ++++++++++++++++++++++
> 2 files changed, 40 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index def3976bd5bb..f0a0115e08fa 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -733,14 +733,6 @@ &pcie4 {
> status = "okay";
>
> pcie@0 {
> - device_type = "pci";
> - reg = <0x0 0x0 0x0 0x0 0x0>;
> - #address-cells = <3>;
> - #size-cells = <2>;
> - ranges;
> -
> - bus-range = <0x01 0xff>;
> -
> wifi@0 {

This doesn't seem right, pleas use a label

Konrad

\
 
 \ /
  Last update: 2024-05-27 15:14    [W:0.151 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site