| Date | Fri, 29 Sep 2023 10:24:44 +0100 | Subject | Re: [PATCH v2 18/28] pinctrl: renesas: rzg2l: add support for different ds values on different groups | From | Paul Barker <> |
| |
On 29/09/2023 06:39, Claudiu wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > RZ/G3S supports different drive strength values for different power sources > and pin groups (A, B, C). On each group there could be up to 4 drive > strength values per power source. Available power sources are 1v8, 2v5, > 3v3. Drive strength values are fine tuned than what was previously
Should this be "are more fine tuned" or "are less fine tuned"?
> available on the driver thus the necessity of having micro-amp support. > As drive strength and power source values are linked together the > hardware setup for these was moved at the end of > rzg2l_pinctrl_pinconf_set() to ensure proper validation of the new > values. > > The drive strength values are expected to be initialized though SoC > specific hardware configuration data structure. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Thanks, Paul [unhandled content-type:application/pgp-keys][unhandled content-type:application/pgp-signature] |