Messages in this thread Patch in this message | | | From | Bryan O'Donoghue <> | Subject | [PATCH 7/7] arm64: dts: qcom: apq8016-sbc: Enable camss for non-mezzanine cases | Date | Wed, 9 Aug 2023 13:04:32 +0100 |
| |
When we have no camera mezzanine attached it is still possible to run the test-pattern generator of the CSID block.
As an example:
media-ctl --reset
yavta --no-query -w '0x009f0903 1' /dev/v4l-subdev2 yavta --list /dev/v4l-subdev2
media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:UYVY8_1X16/1920x1080 field:none]' media-ctl -l '"msm_csid0":1->"msm_ispif0":0[1]' media-ctl -d /dev/media0 -V '"msm_ispif0":0[fmt:UYVY8_1X16/1920x1080 field:none]' media-ctl -l '"msm_ispif0":1->"msm_vfe0_rdi0":0[1]' media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:UYVY8_1X16/1920x1080]' media-ctl -d /dev/media0 -p
yavta -B capture-mplane --capture=5 -n 5 -I -f UYVY -s 1920x1080 --file=TPG-UYVU-1920x1080-000-#.bin /dev/video0
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 84641925f3329..46cbeaa2f2acc 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -250,6 +250,15 @@ &blsp_uart2 { label = "LS-UART1"; }; +&camss { + status = "okay"; + ports { + port@0 { + reg = <0>; + }; + }; +}; + &lpass { status = "okay"; }; -- 2.39.2
| |