Messages in this thread Patch in this message | | | From | Bryan O'Donoghue <> | Subject | [PATCH 4/7] arm64: dts: qcom: apq8016-sbc: Rename ov5640 enable-gpios to powerdown-gpios | Date | Wed, 9 Aug 2023 13:04:29 +0100 |
| |
There are two control lines controlled by GPIO going into ov5640
- Reset - Powerdown
The driver and yaml expect "reset-gpios" and "powerdown-gpios" there has never been an "enable-gpios".
Fixes: 39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index ada0777567623..ddb19709a9eee 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -273,7 +273,7 @@ camera_rear@3b { compatible = "ovti,ov5640"; reg = <0x3b>; - enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&camera_rear_default>; -- 2.39.2
| |