lkml.org 
[lkml]   [2023]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[patch v2 31/38] x86/cpu: Use common topology code for HYGON
Date
Switch it over to use the consolidated topology evaluation and remove the
temporary safe guards which are not longer needed.

No functional change intended.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/common.c | 5 -
arch/x86/kernel/cpu/cpu.h | 1
arch/x86/kernel/cpu/hygon.c | 123 ----------------------------------
arch/x86/kernel/cpu/topology.h | 1
arch/x86/kernel/cpu/topology_common.c | 22 +-----
5 files changed, 4 insertions(+), 148 deletions(-)

--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1739,11 +1739,6 @@ static void identify_cpu(struct cpuinfo_
/* Clear/Set all flags overridden by options, after probe */
apply_forced_caps(c);

-#ifdef CONFIG_X86_64
- if (!topo_is_converted(c))
- c->topo.apicid = apic->phys_pkg_id(c->topo.initial_apicid, 0);
-#endif
-
/*
* Vendor-specific initialization. In this section we
* canonicalize the feature flags, meaning if there are
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -76,7 +76,6 @@ extern void init_intel_cacheinfo(struct
extern void init_amd_cacheinfo(struct cpuinfo_x86 *c);
extern void init_hygon_cacheinfo(struct cpuinfo_x86 *c);

-extern int detect_extended_topology(struct cpuinfo_x86 *c);
extern void check_null_seg_clears_base(struct cpuinfo_x86 *c);

void cacheinfo_amd_init_llc_id(struct cpuinfo_x86 *c, u16 die_id);
--- a/arch/x86/kernel/cpu/hygon.c
+++ b/arch/x86/kernel/cpu/hygon.c
@@ -20,12 +20,6 @@

#define APICID_SOCKET_ID_BIT 6

-/*
- * nodes_per_socket: Stores the number of nodes per socket.
- * Refer to CPUID Fn8000_001E_ECX Node Identifiers[10:8]
- */
-static u32 nodes_per_socket = 1;
-
#ifdef CONFIG_NUMA
/*
* To workaround broken NUMA config. Read the comment in
@@ -49,76 +43,6 @@ static int nearby_node(int apicid)
}
#endif

-static void hygon_get_topology_early(struct cpuinfo_x86 *c)
-{
- if (cpu_has(c, X86_FEATURE_TOPOEXT))
- smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
-}
-
-/*
- * Fixup core topology information for
- * (1) Hygon multi-node processors
- * Assumption: Number of cores in each internal node is the same.
- * (2) Hygon processors supporting compute units
- */
-static void hygon_get_topology(struct cpuinfo_x86 *c)
-{
- /* get information required for multi-node processors */
- if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
- int err;
- u32 eax, ebx, ecx, edx;
-
- cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
-
- c->topo.die_id = ecx & 0xff;
-
- c->topo.core_id = ebx & 0xff;
-
- if (smp_num_siblings > 1)
- c->x86_max_cores /= smp_num_siblings;
-
- /*
- * In case leaf B is available, use it to derive
- * topology information.
- */
- err = detect_extended_topology(c);
- if (!err)
- c->x86_coreid_bits = get_count_order(c->x86_max_cores);
-
- /* Socket ID is ApicId[6] for these processors. */
- c->topo.pkg_id = c->topo.apicid >> APICID_SOCKET_ID_BIT;
-
- cacheinfo_hygon_init_llc_id(c);
- } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
- u64 value;
-
- rdmsrl(MSR_FAM10H_NODE_ID, value);
- c->topo.die_id = value & 7;
- c->topo.llc_id = c->topo.die_id;
- } else
- return;
-
- if (nodes_per_socket > 1)
- set_cpu_cap(c, X86_FEATURE_AMD_DCM);
-}
-
-/*
- * On Hygon setup the lower bits of the APIC id distinguish the cores.
- * Assumes number of cores is a power of two.
- */
-static void hygon_detect_cmp(struct cpuinfo_x86 *c)
-{
- unsigned int bits;
-
- bits = c->x86_coreid_bits;
- /* Low order bits define the core id (index of core in socket) */
- c->topo.core_id = c->topo.initial_apicid & ((1 << bits)-1);
- /* Convert the initial APIC ID into the socket ID */
- c->topo.pkg_id = c->topo.initial_apicid >> bits;
- /* Use package ID also for last level cache */
- c->topo.llc_id = c->topo.die_id = c->topo.pkg_id;
-}
-
static void srat_detect_node(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_NUMA
@@ -169,32 +93,6 @@ static void srat_detect_node(struct cpui
#endif
}

-static void early_init_hygon_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned int bits, ecx;
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level < 0x80000008)
- return;
-
- ecx = cpuid_ecx(0x80000008);
-
- c->x86_max_cores = (ecx & 0xff) + 1;
-
- /* CPU telling us the core id bits shift? */
- bits = (ecx >> 12) & 0xF;
-
- /* Otherwise recompute */
- if (bits == 0) {
- while ((1 << bits) < c->x86_max_cores)
- bits++;
- }
-
- c->x86_coreid_bits = bits;
-#endif
-}
-
static void bsp_init_hygon(struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
@@ -208,18 +106,6 @@ static void bsp_init_hygon(struct cpuinf
if (cpu_has(c, X86_FEATURE_MWAITX))
use_mwaitx_delay();

- if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
- u32 ecx;
-
- ecx = cpuid_ecx(0x8000001e);
- __max_die_per_package = nodes_per_socket = ((ecx >> 8) & 7) + 1;
- } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
- u64 value;
-
- rdmsrl(MSR_FAM10H_NODE_ID, value);
- __max_die_per_package = nodes_per_socket = ((value >> 3) & 7) + 1;
- }
-
if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
!boot_cpu_has(X86_FEATURE_VIRT_SSBD)) {
/*
@@ -238,8 +124,6 @@ static void early_init_hygon(struct cpui
{
u32 dummy;

- early_init_hygon_mc(c);
-
set_cpu_cap(c, X86_FEATURE_K8);

rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
@@ -280,8 +164,6 @@ static void early_init_hygon(struct cpui
* we can set it unconditionally.
*/
set_cpu_cap(c, X86_FEATURE_VMMCALL);
-
- hygon_get_topology_early(c);
}

static void init_hygon(struct cpuinfo_x86 *c)
@@ -296,9 +178,6 @@ static void init_hygon(struct cpuinfo_x8

set_cpu_cap(c, X86_FEATURE_REP_GOOD);

- /* get apicid instead of initial apic id from cpuid */
- c->topo.apicid = read_apic_id();
-
/*
* XXX someone from Hygon needs to confirm this DTRT
*
@@ -310,8 +189,6 @@ static void init_hygon(struct cpuinfo_x8

cpu_detect_cache_sizes(c);

- hygon_detect_cmp(c);
- hygon_get_topology(c);
srat_detect_node(c);

init_hygon_cacheinfo(c);
--- a/arch/x86/kernel/cpu/topology.h
+++ b/arch/x86/kernel/cpu/topology.h
@@ -15,7 +15,6 @@ struct topo_scan {
u16 amd_node_id;
};

-bool topo_is_converted(struct cpuinfo_x86 *c);
void cpu_init_topology(struct cpuinfo_x86 *c);
void cpu_parse_topology(struct cpuinfo_x86 *c);
void topology_set_dom(struct topo_scan *tscan, enum x86_topology_domains dom,
--- a/arch/x86/kernel/cpu/topology_common.c
+++ b/arch/x86/kernel/cpu/topology_common.c
@@ -61,18 +61,6 @@ static void parse_legacy(struct topo_sca
topology_set_dom(tscan, TOPO_CORE_DOMAIN, core_shift, cores >> smt_shift);
}

-bool topo_is_converted(struct cpuinfo_x86 *c)
-{
- /* Temporary until everything is converted over. */
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_HYGON:
- return false;
- default:
- /* Let all UP systems use the below */
- return true;
- }
-}
-
static bool fake_topology(struct topo_scan *tscan)
{
/*
@@ -137,6 +125,10 @@ static void parse_topology(struct topo_s
if (!IS_ENABLED(CONFIG_CPU_SUP_INTEL) || !cpu_parse_topology_ext(tscan))
parse_legacy(tscan);
break;
+ case X86_VENDOR_HYGON:
+ if (IS_ENABLED(CONFIG_CPU_SUP_HYGON))
+ cpu_parse_topology_amd(tscan);
+ break;
}
}

@@ -179,9 +171,6 @@ void cpu_parse_topology(struct cpuinfo_x

parse_topology(&tscan, false);

- if (!topo_is_converted(c))
- return;
-
for (dom = TOPO_SMT_DOMAIN; dom < TOPO_MAX_DOMAIN; dom++) {
if (tscan.dom_shifts[dom] == x86_topo_system.dom_shifts[dom])
continue;
@@ -210,9 +199,6 @@ void __init cpu_init_topology(struct cpu

parse_topology(&tscan, true);

- if (!topo_is_converted(c))
- return;
-
/* Copy the shift values and calculate the unit sizes. */
memcpy(x86_topo_system.dom_shifts, tscan.dom_shifts, sizeof(x86_topo_system.dom_shifts));

\
 
 \ /
  Last update: 2023-07-28 14:19    [W:0.457 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site