Messages in this thread | | | From | Frank Oltmanns <> | Subject | [PATCH v3 0/8] clk: sunxi-ng: Consider alternative parent rates when determining NKM clock rate | Date | Sun, 02 Jul 2023 19:55:19 +0200 |
| |
This patchset enables NKM clocks to consider alternative parent rates and utilize this new feature to adjust the pll-video0 clock on Allwinner A64 (PATCH 1 and 2).
Furthermore, with this patchset pll-video0 considers rates that are higher than the requested rate when finding the closest rate. In consequence, higher rates are also considered by pll-video0's descandents (PATCH 3 et. seq.).
This allows us to achieve an optimal rate for driving the board's panel.
To provide some context, the clock structure involved in this process is as follows: clock clock type -------------------------------------- pll-video0 ccu_nm pll-mipi ccu_nkm tcon0 ccu_mux tcon-data-clock sun4i_dclk
The divider between tcon0 and tcon-data-clock is fixed at 4. Therefore, in order to achieve a rate that closely matches the desired rate of the panel, pll-mipi needs to operate at a specific rate.
Tests ===== So far, this has been successfully tested on the A64-based Pinephone using three different panel rates:
1. A panel rate that can be matched exactly by pll-video0. 2. A panel rate that requires pll-video0 to undershoot to get the closest rate. 3. A panel rate that requires pll-video0 to overshoot to get the closest rate.
Test records:
Re 1: ----- Panel requests tcon-data-clock of 103500000 Hz, i.e., pll-mipi needs to run at 414000000 Hz. This results in the following clock rates: clock rate ---------------------------------------- pll-video0 207000000 hdmi-phy-clk 51750000 hdmi 207000000 tcon1 207000000 pll-mipi 414000000 tcon0 414000000 tcon-data-clock 103500000
The results of the find_best calls: [ 12.345862] ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1 [ 12.346111] ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1 [ 12.346291] ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1 [ 12.346471] ccu_nkm_find_best_with_parent_adj: rate=414000000, best_rate=414000000, best_parent_rate=207000000, n=1, k=2, m=1 [ 12.346867] ccu_nkm_find_best: rate=414000000, best_rate=414000000, parent_rate=207000000, n=1, k=2, m=1
Re 2: ----- Panel requests tcon-data-clock of 103650000 Hz, i.e., pll-mipi needs to run at 414600000 Hz. This results in the following clock rates: clock rate ---------------------------------------- pll-video0 282666666 hdmi-phy-clk 70666666 hdmi 282666666 tcon1 282666666 pll-mipi 414577776 tcon0 414577776 tcon-data-clock 103644444
The results of the find_best calls: [ 13.638954] ccu_nkm_find_best_with_parent_adj: rate=414600000, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15 [ 13.639212] ccu_nkm_find_best_with_parent_adj: rate=414600000, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15 [ 13.639395] ccu_nkm_find_best_with_parent_adj: rate=414577776, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15 [ 13.639577] ccu_nkm_find_best_with_parent_adj: rate=414577776, best_rate=414577776, best_parent_rate=282666666, n=11, k=2, m=15 [ 13.639913] ccu_nkm_find_best: rate=414577776, best_rate=414577776, parent_rate=282666666, n=11, k=2, m=15
Here, we consistently ask the pll-video0 for a rate that it can't provide exactly: - rate=414600000: We ask the parent for 282681818 (rate * m / (n * k)), it returns 282666666. Here the parent undershoots. - rate=414577776: We ask the parent for 282666665 (rate * m / (n * k)), it returns 282666666. Here the parent overshoots.
So, in both cases it rounds to the nearest rate (first down, then up), which is the intended behaviour.
Re 3: ----- Panel requests tcon-data-clock of 112266000 Hz, i.e., pll-mipi needs to run at 449064000 Hz. This results in the following clock rates: clock rate ---------------------------------------- pll-video0 207272727 hdmi-phy-clk 51818181 hdmi 207272727 tcon1 207272727 pll-mipi 449090908 tcon0 449090908 tcon-data-clock 112272727
The results of the find_best calls: [ 13.871022] ccu_nkm_find_best_with_parent_adj: rate=449064000, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12 [ 13.871277] ccu_nkm_find_best_with_parent_adj: rate=449064000, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12 [ 13.871461] ccu_nkm_find_best_with_parent_adj: rate=449090908, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12 [ 13.871646] ccu_nkm_find_best_with_parent_adj: rate=449090908, best_rate=449090908, best_parent_rate=207272727, n=13, k=2, m=12 [ 13.872050] ccu_nkm_find_best: rate=449090908, best_rate=449090908, parent_rate=207272727, n=13, k=2, m=12
Here, we consistently ask the pll-video0 for a rate that it can't provide exactly: - rate=449064000: We ask the parent for 207260307 (rate * m / (n * k)), it returns 207272727. - rate=449090908: We ask the parent for 207272726 (rate * m / (n * k)), it returns 207272727.
So, in both cases, it rounds up to the nearest rate, which is the intended behavior.
Changes in v3: - Use dedicated function for finding the best rate in cases where an nkm clock supports setting its parent's rate, streamlining it with the structure that is used in other sunxi-ng ccus such as ccu_mp (PATCH 1). - Therefore, remove the now obsolete comments that were introduced in v2 (PATCH 1). - Remove the dedicated function for calculating the optimal parent rate for nkm clocks that was introduced in v2. Instead use a simple calculation and require the parent clock to select the closest rate to achieve optimal results (PATCH 1). - Therefore, add support to set the closest rate for nm clocks (because pll-mipi's parent pll-video0 is an nm clock) and all clock types that are descendants of a64's pll-video0, i.e., nkm, mux, and div (PATCH 3 et. seq.). - Link to v2: https://lore.kernel.org/all/20230611090143.132257-1-frank@oltmanns.dev/
Changes in V2: - Move optimal parent rate calculation to dedicated function - Choose a parent rate that does not to overshoot requested rate - Add comments to ccu_nkm_find_best - Make sure that best_parent_rate stays at original parent rate in the unlikely case that all combinations overshoot.
Link to V1: https://lore.kernel.org/lkml/20230605190745.366882-1-frank@oltmanns.dev/
--- Frank Oltmanns (8): clk: sunxi-ng: nkm: consider alternative parent rates when determining rate clk: sunxi-ng: a64: allow pll-mipi to set parent's rate clk: sunxi-ng: Add feature to find closest rate clk: sunxi-ng: nm: Support finding closest rate clk: sunxi-ng: nkm: Support finding closest rate clk: sunxi-ng: mux: Support finding closest rate clk: sunxi-ng: div: Support finding closest rate clk: sunxi-ng: a64: select closest rate for pll-video0
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 25 ++++++----- drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 3 +- drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 6 ++- drivers/clk/sunxi-ng/ccu_common.h | 1 + drivers/clk/sunxi-ng/ccu_div.h | 30 +++++++++++++ drivers/clk/sunxi-ng/ccu_mux.c | 36 +++++++++++++--- drivers/clk/sunxi-ng/ccu_mux.h | 17 ++++++++ drivers/clk/sunxi-ng/ccu_nkm.c | 80 ++++++++++++++++++++++++++++++++--- drivers/clk/sunxi-ng/ccu_nm.c | 23 +++++++++- drivers/clk/sunxi-ng/ccu_nm.h | 6 ++- 10 files changed, 198 insertions(+), 29 deletions(-) --- base-commit: 6995e2de6891c724bfeb2db33d7b87775f913ad1 change-id: 20230626-pll-mipi_set_rate_parent-3363fc0d6e6f
Best regards, -- Frank Oltmanns <frank@oltmanns.dev>
| |