lkml.org 
[lkml]   [2023]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v3 3/8] clk: sunxi-ng: Add feature to find closest rate
The default behaviour of clocks in the sunxi-ng driver is to select a
clock rate that is closest to but less than the requested rate.

Add the CCU_FEATURE_CLOSEST_RATE flag, which can be used to allow clocks
to find the closest rate instead.

Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
---
drivers/clk/sunxi-ng/ccu_common.h | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/clk/sunxi-ng/ccu_common.h b/drivers/clk/sunxi-ng/ccu_common.h
index fbf16c6b896d..5ad219f041d5 100644
--- a/drivers/clk/sunxi-ng/ccu_common.h
+++ b/drivers/clk/sunxi-ng/ccu_common.h
@@ -18,6 +18,7 @@
#define CCU_FEATURE_MMC_TIMING_SWITCH BIT(6)
#define CCU_FEATURE_SIGMA_DELTA_MOD BIT(7)
#define CCU_FEATURE_KEY_FIELD BIT(8)
+#define CCU_FEATURE_CLOSEST_RATE BIT(9)

/* MMC timing mode switch bit */
#define CCU_MMC_NEW_TIMING_MODE BIT(30)
--
2.41.0

\
 
 \ /
  Last update: 2023-07-02 19:57    [W:0.140 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site