Messages in this thread | | | Date | Thu, 30 Mar 2023 16:19:04 +0100 | From | Daniel Golle <> | Subject | [PATCH net-next 00/15] net: dsa: add support for MT7988 |
| |
The MediaTek MT7988 SoC comes with a built-in switch very similar to previous MT7530 and MT7531. However, the switch address space is mapped into the SoCs memory space rather than being connected via MDIO. Using MMIO simplifies register access and also removes the need for a bus lock, and for that reason also makes interrupt handling more light-weight.
Note that this is different from previous SoCs like MT7621 and MT7623N which also came with an integrated MT7530-like switch which yet had to be accessed via MDIO.
Split-off the part of the driver registering an MDIO driver, then add another module acting as MMIO/platform driver.
The whole series has been tested on various MediaTek boards: * MT7623A + MT7530 (BPi-R2) * MT7986A + MT7531 (BPi-R3) * MT7988A reference board
Changes since RFC v3: * WARN_ON_ONCE if register read fails * move probing of the reset GPIO and reset controller link out of common probe function, as they are not actually common
Changes since RFC v2: * split into many small commits to ease review * introduce helper functions to reduce code duplication * use helpers for locking to make lock-skipping easier and less ugly to implement. * add dt-bindings for mediatek,mt7988-switch
Changes since initial RFC: * use regmap for register access and move register access to bus- specific driver * move initialization of MT7531 SGMII PCS to MDIO driver
Daniel Golle (15): net: dsa: mt7530: make some noise if register read fails net: dsa: mt7530: refactor SGMII PCS creation net: dsa: mt7530: use unlocked regmap accessors net: dsa: mt7530: use regmap to access switch register space net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function net: dsa: mt7530: introduce mutex helpers net: dsa: mt7530: move p5_intf_modes() function to mt7530.c net: dsa: mt7530: introduce mt7530_probe_common helper function net: dsa: mt7530: introduce mt7530_remove_common helper function net: dsa: mt7530: split-off common parts from mt7531_setup net: dsa: mt7530: introduce separate MDIO driver net: dsa: mt7530: skip locking if MDIO bus isn't present net: dsa: mt7530: add support for 10G link modes for CPU port net: dsa: mt7530: introduce driver for MT7988 built-in switch dt-bindings: net: dsa: mediatek,mt7530: add mediatek,mt7988-switch
.../bindings/net/dsa/mediatek,mt7530.yaml | 26 +- MAINTAINERS | 3 + drivers/net/dsa/Kconfig | 28 +- drivers/net/dsa/Makefile | 4 +- drivers/net/dsa/mt7530-mdio.c | 271 ++++++++++ drivers/net/dsa/mt7530-mmio.c | 101 ++++ drivers/net/dsa/mt7530.c | 511 ++++++++---------- drivers/net/dsa/mt7530.h | 38 +- 8 files changed, 668 insertions(+), 314 deletions(-) create mode 100644 drivers/net/dsa/mt7530-mdio.c create mode 100644 drivers/net/dsa/mt7530-mmio.c
base-commit: 4ddd6375c3ef6756d492ea5466408cace097121b -- 2.39.2
| |