Messages in this thread | | | Date | Fri, 31 Mar 2023 03:28:30 +0100 | From | Daniel Golle <> | Subject | Re: [PATCH net-next 04/15] net: dsa: mt7530: use regmap to access switch register space |
| |
On Thu, Mar 30, 2023 at 04:20:57PM +0100, Daniel Golle wrote: > Use regmap API to access the switch register space.
I missed to make use of regmap_update_bits in mt7530_rmw which is also used in mt7530_set and mt7530_clear.
I've now made that change and re-tested, it works just as fine and prevents some unneccesary locking overhead. I'll post an updated patch in v2 after giving it a bit more time for other reviewers to also take a look.
> > Signed-off-by: Daniel Golle <daniel@makrotopia.org> > --- > drivers/net/dsa/mt7530.c | 91 +++++++++++++++++++++++++--------------- > drivers/net/dsa/mt7530.h | 2 + > 2 files changed, 60 insertions(+), 33 deletions(-) > > diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c > index d8b041d79f2b7..e27a0e551cec0 100644 > --- a/drivers/net/dsa/mt7530.c > +++ b/drivers/net/dsa/mt7530.c > @@ -183,9 +183,9 @@ core_clear(struct mt7530_priv *priv, u32 reg, u32 val) > } > > static int > -mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) > +mt7530_regmap_write(void *context, unsigned int reg, unsigned int val) > { > - struct mii_bus *bus = priv->bus; > + struct mii_bus *bus = context; > u16 page, r, lo, hi; > int ret; > > @@ -197,24 +197,34 @@ mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) > /* MT7530 uses 31 as the pseudo port */ > ret = bus->write(bus, 0x1f, 0x1f, page); > if (ret < 0) > - goto err; > + return ret; > > ret = bus->write(bus, 0x1f, r, lo); > if (ret < 0) > - goto err; > + return ret; > > ret = bus->write(bus, 0x1f, 0x10, hi); > -err: > + return ret; > +} > + > +static int > +mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val) > +{ > + int ret; > + > + ret = regmap_write(priv->regmap, reg, val); > + > if (ret < 0) > - dev_err(&bus->dev, > + dev_err(priv->dev, > "failed to write mt7530 register\n"); > + > return ret; > } > > -static u32 > -mt7530_mii_read(struct mt7530_priv *priv, u32 reg) > +static int > +mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val) > { > - struct mii_bus *bus = priv->bus; > + struct mii_bus *bus = context; > u16 page, r, lo, hi; > int ret; > > @@ -223,17 +233,32 @@ mt7530_mii_read(struct mt7530_priv *priv, u32 reg) > > /* MT7530 uses 31 as the pseudo port */ > ret = bus->write(bus, 0x1f, 0x1f, page); > - if (ret < 0) { > + if (ret < 0) > + return ret; > + > + lo = bus->read(bus, 0x1f, r); > + hi = bus->read(bus, 0x1f, 0x10); > + > + *val = (hi << 16) | (lo & 0xffff); > + > + return 0; > +} > + > +static u32 > +mt7530_mii_read(struct mt7530_priv *priv, u32 reg) > +{ > + int ret; > + u32 val; > + > + ret = regmap_read(priv->regmap, reg, &val); > + if (ret) { > WARN_ON_ONCE(1); > - dev_err(&bus->dev, > + dev_err(priv->dev, > "failed to read mt7530 register\n"); > return 0; > } > > - lo = bus->read(bus, 0x1f, r); > - hi = bus->read(bus, 0x1f, 0x10); > - > - return (hi << 16) | (lo & 0xffff); > + return val; > } > > static void > @@ -2896,22 +2921,6 @@ static const struct phylink_pcs_ops mt7530_pcs_ops = { > .pcs_an_restart = mt7530_pcs_an_restart, > }; > > -static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val) > -{ > - struct mt7530_priv *priv = context; > - > - *val = mt7530_mii_read(priv, reg); > - return 0; > -}; > - > -static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val) > -{ > - struct mt7530_priv *priv = context; > - > - mt7530_mii_write(priv, reg, val); > - return 0; > -}; > - > static void > mt7530_mdio_regmap_lock(void *mdio_lock) > { > @@ -2924,7 +2933,7 @@ mt7530_mdio_regmap_unlock(void *mdio_lock) > mutex_unlock(mdio_lock); > } > > -static const struct regmap_bus mt7531_regmap_bus = { > +static const struct regmap_bus mt7530_regmap_bus = { > .reg_write = mt7530_regmap_write, > .reg_read = mt7530_regmap_read, > }; > @@ -2957,7 +2966,7 @@ mt7531_create_sgmii(struct mt7530_priv *priv) > mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock; > > regmap = devm_regmap_init(priv->dev, > - &mt7531_regmap_bus, priv, > + &mt7530_regmap_bus, priv->bus, > mt7531_pcs_config[i]); > if (IS_ERR(regmap)) { > ret = PTR_ERR(regmap); > @@ -3128,6 +3137,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match); > static int > mt7530_probe(struct mdio_device *mdiodev) > { > + static struct regmap_config *regmap_config; > struct mt7530_priv *priv; > struct device_node *dn; > > @@ -3207,6 +3217,21 @@ mt7530_probe(struct mdio_device *mdiodev) > mutex_init(&priv->reg_mutex); > dev_set_drvdata(&mdiodev->dev, priv); > > + regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config), > + GFP_KERNEL); > + if (!regmap_config) > + return -ENOMEM; > + > + regmap_config->reg_bits = 16; > + regmap_config->val_bits = 32; > + regmap_config->reg_stride = 4; > + regmap_config->max_register = MT7530_CREV; > + regmap_config->disable_locking = true; > + priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, > + priv->bus, regmap_config); > + if (IS_ERR(priv->regmap)) > + return PTR_ERR(priv->regmap); > + > return dsa_register_switch(priv->ds); > } > > diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h > index c5d29f3fc1d80..39aaca50961bd 100644 > --- a/drivers/net/dsa/mt7530.h > +++ b/drivers/net/dsa/mt7530.h > @@ -754,6 +754,7 @@ struct mt753x_info { > * @dev: The device pointer > * @ds: The pointer to the dsa core structure > * @bus: The bus used for the device and built-in PHY > + * @regmap: The regmap instance representing all switch registers > * @rstc: The pointer to reset control used by MCM > * @core_pwr: The power supplied into the core > * @io_pwr: The power supplied into the I/O > @@ -774,6 +775,7 @@ struct mt7530_priv { > struct device *dev; > struct dsa_switch *ds; > struct mii_bus *bus; > + struct regmap *regmap; > struct reset_control *rstc; > struct regulator *core_pwr; > struct regulator *io_pwr; > -- > 2.39.2 > >
| |