lkml.org 
[lkml]   [2023]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] net: ravb: Start TX queues after HW initialization succeeded
Date
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

ravb_phy_start() may fail. If that happens, the TX queues will remain
started. Thus, move the netif_tx_start_all_queues() after PHY is
successfully initialized.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
---

Changes since [1]:
- collected Rb tag

[1] https://lore.kernel.org/all/20231120084606.4083194-1-claudiu.beznea.uj@bp.renesas.com/

drivers/net/ethernet/renesas/ravb_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 2d4f4fb3d16e..f7e62e6c9df9 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1812,13 +1812,13 @@ static int ravb_open(struct net_device *ndev)
if (info->gptp)
ravb_ptp_init(ndev, priv->pdev);

- netif_tx_start_all_queues(ndev);
-
/* PHY control start */
error = ravb_phy_start(ndev);
if (error)
goto out_ptp_stop;

+ netif_tx_start_all_queues(ndev);
+
return 0;

out_ptp_stop:
--
2.39.2
\
 
 \ /
  Last update: 2023-11-27 10:07    [W:0.090 / U:2.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site