lkml.org 
[lkml]   [2022]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.19 078/192] arm64: dts: ls1028a-qds-65bb: dont use in-band autoneg for 2500base-x
Date
From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit e7406f864e765c564c5cf384464faff66114f97d ]

The Lynx PCS integrated with ENETC port 0 does not support in-band
autoneg for the 2500base-x SERDES protocol, and prints errors from its
phylink methods. Furthermore, the AQR112 card used for these boards does
not expect in-band autoneg either. So delete the extraneous property.

Fixes: e426d63e752b ("arm64: dts: ls1028a-qds: add overlays for various serdes protocols")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
index 40d34c8384a5e..b949cac037427 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -25,7 +25,6 @@
&enetc_port0 {
phy-handle = <&slot1_sgmii>;
phy-mode = "2500base-x";
- managed = "in-band-status";
status = "okay";
};

--
2.35.1


\
 
 \ /
  Last update: 2022-09-13 16:23    [W:0.758 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site