lkml.org 
[lkml]   [2022]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch
On Tue, 28 Jun 2022 18:16:14 +0300
Claudiu Beznea <claudiu.beznea@microchip.com> wrote:

> Check return status of at91_adc_read_position() and
> at91_adc_read_pressure() in at91_adc_read_info_raw().
>
> Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> drivers/iio/adc/at91-sama5d2_adc.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> index 32b6f157b803..c3301c749164 100644
> --- a/drivers/iio/adc/at91-sama5d2_adc.c
> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> @@ -1544,8 +1544,10 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
> *val = tmp_val;
> mutex_unlock(&st->lock);
> iio_device_release_direct_mode(indio_dev);
Prefer to keep error path out of line.

if (ret < 0)
return ret;

return at91_adc_adjust_val_osr();

Also ends up as a slightly less invasive change.

> + if (ret > 0)
> + ret = at91_adc_adjust_val_osr(st, val);
>
> - return at91_adc_adjust_val_osr(st, val);
> + return ret;
> }
> if (chan->type == IIO_PRESSURE) {
> ret = iio_device_claim_direct_mode(indio_dev);
> @@ -1558,8 +1560,10 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
> *val = tmp_val;
> mutex_unlock(&st->lock);
> iio_device_release_direct_mode(indio_dev);
> + if (ret > 0)
> + ret = at91_adc_adjust_val_osr(st, val);
>
> - return at91_adc_adjust_val_osr(st, val);
As above.

> + return ret;
> }
>
> /* in this case we have a voltage channel */

\
 
 \ /
  Last update: 2022-07-16 18:16    [W:0.214 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site