lkml.org 
[lkml]   [2022]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support
Date
On 31.07.2022 23:11, Jonathan Cameron wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On Tue, 28 Jun 2022 18:16:31 +0300
> Claudiu Beznea <claudiu.beznea@microchip.com> wrote:
>
>> Add runtime PM support by disabling/enabling ADC's peripheral clock.
>> On simple conversion the ADC's clock is kept enabled just while the
>> conversion is in progress. This includes also temperature conversion.
>> For triggered buffers and touch conversions the ADC clock is kept enabled
>> while the triggered buffers or touch are enabled. Along with it removed
>> the __maybe_unused on suspend() and resume() ops as the dev_pm_ops
>> object members are now filled with SYSTEM_SLEEP_PM_OPS().
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> Hi Claudia,
>
> This patch crossed with a mass conversion series taking lots of drivers
> over to the new PM ops macros. That covered some of the changes in here.
> I've hand applied this but please check I didn't mess it up.

Hi, Jonathan,

I've tested it on a SAMA5D2 and it was good.

Thank you for taking care of it.
Claudiu Beznea

>
> Thanks,
>
> Jonathan

\
 
 \ /
  Last update: 2022-08-01 11:45    [W:3.983 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site