lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] SUNIV USB support (and updating mailmap)
Date
This patchset introduces support for F1C100s' USB.

As I switched to a new mail address, and this patchset contains patches
authored before this change, a mailmap update is added.

The DT binding and driver support for SUNIV USB PHY/MUSB are added, in
addition to DT changes to the DTSI and Lichee Nano DT.

Icenowy Zheng (7):
mailmap: update Icenowy Zheng's mail address
dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY
dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string
phy: sun4i-usb: add support for the USB PHY on F1C100s SoC
musb: sunxi: add support for the F1C100s MUSB controller
ARM: suniv: add USB-related device nodes
ARM: suniv: f1c100s: enable USB on Lichee Pi Nano

.mailmap | 3 +
.../phy/allwinner,suniv-f1c100s-usb-phy.yaml | 83 +++++++++++++++++++
.../usb/allwinner,sun4i-a10-musb.yaml | 1 +
.../boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++
arch/arm/boot/dts/suniv-f1c100s.dtsi | 26 ++++++
drivers/phy/allwinner/phy-sun4i-usb.c | 11 +++
drivers/usb/musb/sunxi.c | 8 +-
7 files changed, 146 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml

--
2.36.0

\
 
 \ /
  Last update: 2022-06-08 10:38    [W:0.173 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site