lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 4/4] arm64: dts: imx8mm.dtsi: Add resets for dispmix power domain.
From
Date
Am Montag, dem 02.05.2022 um 12:02 +0200 schrieb Viraj Shah:
> The resets are controlled from src. From reference manual page
> 959, display controller needs DISP_RESET bit to be set to reset
> dispmix.
>
This reset is driven by the GPC hardware logic. Only if you are 100%
sure that this is not the case should a reset be added to the DT, as
handling it both from the GPC HW sequencing and software has proven to
be problematic and result in sporadic hangs.

Regards,
Lucas

> Signed-off-by: Viraj Shah <viraj.shah@linutronix.de>
> ---
> arch/arm64/boot/dts/freescale/imx8mm.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 1ee05677c2dd..11a6cae5bb99 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -734,6 +734,7 @@
> assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
> <&clk IMX8MM_SYS_PLL1_800M>;
> assigned-clock-rates = <500000000>, <200000000>;
> + resets = <&src IMX8MQ_RESET_DISP_RESET>;
> };
>
> pgc_mipi: power-domain@11 {


\
 
 \ /
  Last update: 2022-05-02 12:16    [W:0.054 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site