lkml.org 
[lkml]   [2022]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/3] iio: accel: add MSA311 accelerometer driver
Date
MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
sensitivity consumer applications. It has dynamical user selectable full
scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
with output data rates from 1Hz to 1000Hz.

Datasheet can be found at following URL:
https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf

This driver supports following MSA311 features:
- IIO interface
- Different power modes: NORMAL, SUSPEND and LOW (using pm_runtime)
- ODR (Output Data Rate) selection
- Scale and samp_freq selection
- IIO triggered buffer, IIO reg access
- NEW_DATA interrupt + trigger

Below features to be done:
- Motion Events: ACTIVE, TAP, ORIENT, FREEFALL

Also this patchset has new vendor prefix for MEMSensing Microsystems and
MSA311 dt-binding schema.

You can test msa311 driver using libiio and gnuplot following below
instructions:
$ # Read 4K samples using buffer with depth equals to 64 samples and
$ # rotate device a little bit
$ iio_readdev -u "local:" -b 64 -s 4096 msa311 > /data/local/tmp/msa311.dat
$ gnuplot
gnuplot> set title "MSA311 Accel Data"
gnuplot>
gnuplot> set key below
gnuplot>
gnuplot> set xdata time
gnuplot> set format x "%H:%M\n%.4S"
gnuplot> set xlabel "timestamp"
gnuplot>
gnuplot> set autoscale y
gnuplot> plot 'msa311.dat' binary format='%int16%int16%int16%uint16%uint64'\
> using ($5/1000000000):1 title "acc_x" with lines,\
> 'msa311.dat' binary format='%int16%int16%int16%uint16%uint64' using\
> ($5/1000000000):2 title "acc_y" with lines,\
> 'msa311.dat' binary format='%int16%int16%int16%uint16%uint64' using\
> ($5/1000000000):3 title "acc_z" with lines

Dmitry Rokosov (3):
dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
iio: add MEMSensing MSA311 3-axis accelerometer driver
dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver

.../bindings/iio/accel/memsensing,msa311.yaml | 64 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 7 +
drivers/iio/accel/Kconfig | 13 +
drivers/iio/accel/Makefile | 2 +
drivers/iio/accel/msa311.c | 2068 ++++++++++++++++++++
6 files changed, 2156 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
create mode 100644 drivers/iio/accel/msa311.c

--
2.9.5

\
 
 \ /
  Last update: 2022-04-19 18:06    [W:0.171 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site