lkml.org 
[lkml]   [2022]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5 v2] dt-bindings: gnss: Rewrite common bindings in YAML
Date
This rewrites the text-based GNSS common bindings to use
a YAML schema.

Cc: devicetree@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Collected Krzysztof's review tag
- No changes just resending
---
.../devicetree/bindings/gnss/gnss-common.yaml | 55 +++++++++++++++++++
.../devicetree/bindings/gnss/gnss.txt | 37 -------------
2 files changed, 55 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gnss/gnss-common.yaml
delete mode 100644 Documentation/devicetree/bindings/gnss/gnss.txt

diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
new file mode 100644
index 000000000000..963b926e30a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/gnss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Global Navigation Satellite Systems (GNSS)
+ receiver devices
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+
+description: |
+ This document defines device tree properties common to Global Navigation
+ Satellite System receivers.
+
+properties:
+ $nodename:
+ pattern: "^gnss(@.*)?$"
+
+ lna-supply:
+ description: A separate regulator supplying power for the Low Noise
+ Amplifier (LNA). This is an amplifier connected between the GNSS
+ device and the receiver antenna.
+
+ enable-gpios:
+ description: A GPIO line that will enable the GNSS receiver when
+ asserted. If this line is active low, the GPIO phandle should
+ consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating
+ system can rely on asserting the line to enable the GNSS device.
+ maxItems: 1
+
+ timepulse-gpios:
+ description: When a timepulse is provided to the GNSS device using a
+ GPIO line, this is used.
+ maxItems: 1
+
+ current-speed:
+ description: The baudrate in bits per second of the device as it comes
+ online, current active speed.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ gnss {
+ compatible = "u-blox,neo-8";
+ vcc-supply = <&gnss_reg>;
+ timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ current-speed = <4800>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
deleted file mode 100644
index d6dc9c0d8249..000000000000
--- a/Documentation/devicetree/bindings/gnss/gnss.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-GNSS Receiver DT binding
-
-This documents the binding structure and common properties for GNSS receiver
-devices.
-
-A GNSS receiver node is a node named "gnss" and typically resides on a serial
-bus (e.g. UART, I2C or SPI).
-
-Please refer to the following documents for generic properties:
-
- Documentation/devicetree/bindings/serial/serial.yaml
- Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties:
-
-- compatible : A string reflecting the vendor and specific device the node
- represents
-
-Optional properties:
-- lna-supply : Separate supply for an LNA
-- enable-gpios : GPIO used to enable the device
-- timepulse-gpios : Time pulse GPIO
-
-Example:
-
-serial@1234 {
- compatible = "ns16550a";
-
- gnss {
- compatible = "u-blox,neo-8";
-
- vcc-supply = <&gnss_reg>;
- timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-
- current-speed = <4800>;
- };
-};
--
2.35.1
\
 
 \ /
  Last update: 2022-03-18 00:01    [W:0.100 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site