lkml.org 
[lkml]   [2022]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5 v2] dt-bindings: gnss: Rewrite Mediatek bindings in YAML
Date
This rewrites the Mediatek GNSS bindings in YAML.

Cc: devicetree@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- New patch since Krzysztof pointed out there is really just
one more binding to convert, so why not.
---
.../devicetree/bindings/gnss/mediatek.txt | 35 ------------
.../devicetree/bindings/gnss/mediatek.yaml | 54 +++++++++++++++++++
2 files changed, 54 insertions(+), 35 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gnss/mediatek.txt
create mode 100644 Documentation/devicetree/bindings/gnss/mediatek.yaml

diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
deleted file mode 100644
index 80cb802813c5..000000000000
--- a/Documentation/devicetree/bindings/gnss/mediatek.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek-based GNSS Receiver DT binding
-
-Mediatek chipsets are used in GNSS-receiver modules produced by several
-vendors and can use a UART interface.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible : Must be
-
- "globaltop,pa6h"
-
-- vcc-supply : Main voltage regulator (pin name: VCC)
-
-Optional properties:
-
-- current-speed : Default UART baud rate
-- gnss-fix-gpios : GPIO used to determine device position fix state
- (pin name: FIX, 3D_FIX)
-- reset-gpios : GPIO used to reset the device (pin name: RESET, NRESET)
-- timepulse-gpios : Time pulse GPIO (pin name: PPS1, 1PPS)
-- vbackup-supply : Backup voltage regulator (pin name: VBAT, VBACKUP)
-
-Example:
-
-serial@1234 {
- compatible = "ns16550a";
-
- gnss {
- compatible = "globaltop,pa6h";
- vcc-supply = <&vcc_3v3>;
- };
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml
new file mode 100644
index 000000000000..273732225c1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek GNSS Receiver Device Tree Bindings
+
+allOf:
+ - $ref: gnss-common.yaml#
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+
+description:
+ Mediatek chipsets are used in GNSS-receiver modules produced by several
+ vendors and can use a UART interface.
+
+properties:
+ compatible:
+ const: globaltop,pa6h
+
+ vcc-supply:
+ description:
+ Main voltage regulator, pin name VCC.
+
+ reset-gpios:
+ maxItems: 1
+ description: An optional reset line, with names such as RESET or NRESET.
+ If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
+
+ timepulse-gpios:
+ description: Comes with pin names such as PPS1 or 1PPS.
+
+ vbackup-supply:
+ description:
+ Regulator providing backup voltage, pin names such as VBAT or VBACKUP.
+
+required:
+ - compatible
+ - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ gnss {
+ compatible = "globaltop,pa6h";
+ vcc-supply = <&vcc_3v3>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
--
2.35.1
\
 
 \ /
  Last update: 2022-03-18 00:02    [W:0.092 / U:2.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site