lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] arm64: dts: qcom: hk01: use GPIO flags for tlmm
From


On 07/11/2022 10:29, Robert Marko wrote:
> Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
> harcoding the cell value.
>
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> index b60b2d4c2ea5..c3f3f78271e9 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -4,6 +4,7 @@
> */
> #include "ipq8074.dtsi"
> #include "pmp8074.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
> @@ -52,12 +53,12 @@ &blsp1_uart5 {
>
> &pcie0 {
> status = "okay";
> - perst-gpios = <&tlmm 61 0x1>;
> + perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
> };
>
> &pcie1 {
> status = "okay";
> - perst-gpios = <&tlmm 58 0x1>;
> + perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
> };
>
> &pcie_phy0 {

\
 
 \ /
  Last update: 2022-11-07 10:59    [W:0.072 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site