Messages in this thread Patch in this message | | | From | Robert Marko <> | Subject | [PATCH 2/3] arm64: dts: qcom: hk10: use GPIO flags for tlmm | Date | Mon, 7 Nov 2022 10:29:29 +0100 |
| |
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of harcoding the cell value.
Signed-off-by: Robert Marko <robimarko@gmail.com> --- arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index 262b937e0bc6..651a231554e0 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "ipq8074.dtsi" +#include <dt-bindings/gpio/gpio.h> / { aliases { @@ -39,12 +40,12 @@ &blsp1_uart5 { &pcie0 { status = "okay"; - perst-gpios = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; &pcie1 { status = "okay"; - perst-gpios = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; }; &pcie_phy0 { -- 2.38.1
| |