lkml.org 
[lkml]   [2022]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] arm64: dts: qcom: hk01: use GPIO flags for tlmm
Date
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
harcoding the cell value.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index b60b2d4c2ea5..c3f3f78271e9 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -4,6 +4,7 @@
*/
#include "ipq8074.dtsi"
#include "pmp8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>

/ {
model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
@@ -52,12 +53,12 @@ &blsp1_uart5 {

&pcie0 {
status = "okay";
- perst-gpios = <&tlmm 61 0x1>;
+ perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
};

&pcie1 {
status = "okay";
- perst-gpios = <&tlmm 58 0x1>;
+ perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
};

&pcie_phy0 {
--
2.38.1
\
 
 \ /
  Last update: 2022-11-07 10:30    [W:0.056 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site