lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 10/12] dt-bindings: mmc: convert amlogic,meson-gx.txt to dt-schema
Convert the Amlogic SD / eMMC controller for S905/GXBB family SoCs
to dt-schema.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/mmc/amlogic,meson-gx-mmc.yaml | 78 ++++++++++++++++++++++
.../devicetree/bindings/mmc/amlogic,meson-gx.txt | 39 -----------
2 files changed, 78 insertions(+), 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml
new file mode 100644
index 000000000000..c9545334fd99
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-gx-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic SD / eMMC controller for S905/GXBB family SoCs
+
+description:
+ The MMC 5.1 compliant host controller on Amlogic provides the
+ interface for SD, eMMC and SDIO devices
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - amlogic,meson-gx-mmc
+ - amlogic,meson-axg-mmc
+ - items:
+ - enum:
+ - amlogic,meson-gxbb-mmc
+ - amlogic,meson-gxl-mmc
+ - amlogic,meson-gxm-mmc
+ - const: amlogic,meson-gx-mmc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: core
+ - const: clkin0
+ - const: clkin1
+
+ resets:
+ maxItems: 1
+
+ amlogic,dram-access-quirk:
+ type: boolean
+ description:
+ set when controller's internal DMA engine cannot access the DRAM memory,
+ like on the G12A dedicated SDIO controller.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ mmc@70000 {
+ compatible = "amlogic,meson-gx-mmc";
+ reg = <0x70000 0x2000>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_mmc>, <&xtal>, <&clk_div>;
+ clock-names = "core", "clkin0", "clkin1";
+ pinctrl-0 = <&emm_pins>;
+ resets = <&reset_mmc>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
deleted file mode 100644
index ccc5358db131..000000000000
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Amlogic SD / eMMC controller for S905/GXBB family SoCs
-
-The MMC 5.1 compliant host controller on Amlogic provides the
-interface for SD, eMMC and SDIO devices.
-
-This file documents the properties in addition to those available in
-the MMC core bindings, documented by mmc.txt.
-
-Required properties:
-- compatible : contains one of:
- - "amlogic,meson-gx-mmc"
- - "amlogic,meson-gxbb-mmc"
- - "amlogic,meson-gxl-mmc"
- - "amlogic,meson-gxm-mmc"
- - "amlogic,meson-axg-mmc"
-- clocks : A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
-- clock-names: Should contain the following:
- "core" - Main peripheral bus clock
- "clkin0" - Parent clock of internal mux
- "clkin1" - Other parent clock of internal mux
- The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
- clock rate requested by the MMC core.
-- resets : phandle of the internal reset line
-
-Optional properties:
-- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the
- DRAM memory, like on the G12A dedicated SDIO controller.
-
-Example:
-
- sd_emmc_a: mmc@70000 {
- compatible = "amlogic,meson-gxbb-mmc";
- reg = <0x0 0x70000 0x0 0x2000>;
- interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- pinctrl-0 = <&emmc_pins>;
- resets = <&reset RESET_SD_EMMC_A>;
- };
--
b4 0.10.1

\
 
 \ /
  Last update: 2022-11-18 15:38    [W:0.317 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site