lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 01/12] dt-bindings: firmware: convert meson_sm.txt to dt-schema
Convert the Amlogic Secure Monitor bindings to dt-schema.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/firmware/amlogic,meson-gxbb-sm.yaml | 36 ++++++++++++++++++++++
.../bindings/firmware/meson/meson_sm.txt | 15 ---------
2 files changed, 36 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
new file mode 100644
index 000000000000..33d1408610cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/amlogic,meson-gxbb-sm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Secure Monitor (SM)
+
+description:
+ In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+ NVMEM, enable JTAG, set USB boot, etc...
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+ compatible:
+ const: amlogic,meson-gxbb-sm
+
+patternProperties:
+ "power-controller":
+ type: object
+ $ref: /schemas/power/amlogic,meson-sec-pwrc.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ firmware {
+ secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
deleted file mode 100644
index c248cd44f727..000000000000
--- a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* Amlogic Secure Monitor
-
-In the Amlogic SoCs the Secure Monitor code is used to provide access to the
-NVMEM, enable JTAG, set USB boot, etc...
-
-Required properties for the secure monitor node:
-- compatible: Should be "amlogic,meson-gxbb-sm"
-
-Example:
-
- firmware {
- sm: secure-monitor {
- compatible = "amlogic,meson-gxbb-sm";
- };
- };
--
b4 0.10.1

\
 
 \ /
  Last update: 2022-11-18 15:34    [W:0.248 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site