lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 4/4] riscv: dts: starfive: add power controller node
Date
This adds the power controller node for the Starfive JH7110 SoC.
The pmu needs to be used by other modules such as ISP, VPU, etc.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index c22e8f1d2640..fa7b60b82d71 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -356,6 +356,13 @@
#gpio-cells = <2>;
};

+ pwrc: power-controller@17030000 {
+ compatible = "starfive,jh7110-pmu";
+ reg = <0x0 0x17030000 0x0 0x10000>;
+ interrupts = <111>;
+ #power-domain-cells = <1>;
+ };
+
uart0: serial@10000000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x10000000 0x0 0x10000>;
--
2.17.1
\
 
 \ /
  Last update: 2022-11-18 14:38    [W:0.164 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site