lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 4/4] riscv: dts: starfive: add power controller node
On Fri, 18 Nov 2022 at 14:35, Walker Chen <walker.chen@starfivetech.com> wrote:
>
> This adds the power controller node for the Starfive JH7110 SoC.
> The pmu needs to be used by other modules such as ISP, VPU, etc.
>
> Signed-off-by: Walker Chen <walker.chen@starfivetech.com>

Hi Walker,

You called the driver jh71xx which suggests it also applies to the
jh7100. Are you missing a node in the jh7100 device tree?

> ---
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index c22e8f1d2640..fa7b60b82d71 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -356,6 +356,13 @@
> #gpio-cells = <2>;
> };
>
> + pwrc: power-controller@17030000 {
> + compatible = "starfive,jh7110-pmu";
> + reg = <0x0 0x17030000 0x0 0x10000>;
> + interrupts = <111>;
> + #power-domain-cells = <1>;
> + };
> +
> uart0: serial@10000000 {
> compatible = "snps,dw-apb-uart";
> reg = <0x0 0x10000000 0x0 0x10000>;
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

\
 
 \ /
  Last update: 2022-11-18 19:37    [W:1.199 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site