lkml.org 
[lkml]   [2022]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/10] interconnect: osm-l3: SC8280XP L3 and DDR scaling
Date
The SC8280XP currently shows depressing results in memory benchmarks.
Fix this by introducing support for the platform in the OSM (and EPSS)
L3 driver and support for the platform in the bwmon binding.

Then add the necessary nodes and values throughout the sc8280xp and
sa8540p dtsi files to make the various devices on these platforms scale
both L3, memory bus and DDR.

Bjorn Andersson (10):
interconnect: qcom: osm-l3: Use platform-independent node ids
interconnect: qcom: osm-l3: Squash common descriptors
interconnect: qcom: osm-l3: Add per-core EPSS L3 support
interconnect: qcom: osm-l3: Simplify osm_l3_set()
dt-bindings: interconnect: Add sm8350, sc8280xp and generic OSM L3
compatibles
arm64: dts: qcom: Align with generic osm-l3/epss-l3
arm64: dts: qcom: sc8280xp: Add epss_l3 node
arm64: dts: qcom: sc8280xp: Set up L3 scaling
dt-bindings: interconnect: qcom,msm8998-bwmon: Add sc8280xp bwmon
instances
arm64: dts: qcom: sc8280xp: Add bwmon instances

.../interconnect/qcom,msm8998-bwmon.yaml | 5 +
.../bindings/interconnect/qcom,osm-l3.yaml | 24 ++-
arch/arm64/boot/dts/qcom/sa8540p.dtsi | 39 +++++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 152 ++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
drivers/interconnect/qcom/osm-l3.c | 126 ++++-----------
10 files changed, 252 insertions(+), 104 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2022-11-11 04:26    [W:0.241 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site