lkml.org 
[lkml]   [2021]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v11 5/9] drivers: thermal: tsens: Fix bug in sensor enable for msm8960
Date
Hi!

On 3/18/21 8:52 PM, Ansuel Smith wrote:
> Device based on tsens VER_0 contains a hardware bug that results in some
> problem with sensor enablement. Sensor id 6-11 can't be enabled
> selectively and all of them must be enabled in one step.

Thanks for rewording!

>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> drivers/thermal/qcom/tsens-8960.c | 24 +++++++++++++++++++++---
> 1 file changed, 21 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
> index 86585f439985..bdc64d4188bf 100644
> --- a/drivers/thermal/qcom/tsens-8960.c
> +++ b/drivers/thermal/qcom/tsens-8960.c
> @@ -27,9 +27,9 @@
> #define EN BIT(0)
> #define SW_RST BIT(1)
> #define SENSOR0_EN BIT(3)
> +#define MEASURE_PERIOD BIT(18)
> #define SLP_CLK_ENA BIT(26)
> #define SLP_CLK_ENA_8660 BIT(24)
> -#define MEASURE_PERIOD 1
> #define SENSOR0_SHIFT 3
>
> /* INT_STATUS_ADDR bitmasks */
> @@ -126,17 +126,35 @@ static int resume_8960(struct tsens_priv *priv)
> static int enable_8960(struct tsens_priv *priv, int id)
> {
> int ret;
> - u32 reg, mask;
> + u32 reg, mask = BIT(id);
>
> ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);
> if (ret)
> return ret;
>
> - mask = BIT(id + SENSOR0_SHIFT);
> + /* HARDWARE BUG:
> + * On platform with more than 6 sensors, all the remaining
> + * sensors needs to be enabled all togheder or underfined
> + * results are expected. (Sensor 6-7 disabled, Sensor 3
> + * disabled...) In the original driver, all the sensors
> + * are enabled in one step hence this bug is not triggered.
> + */
> + if (id > 5) {
> + mask = GENMASK(10, 6);
> +
> + /* Sensors already enabled. Skip. */
> + if ((reg & mask) == mask)

This is a bug. You have to do mask <<= SENSOR0_SHIFT; before reg & mask.

> + return 0;
> + }
> +
> + mask <<= SENSOR0_SHIFT;
> +
> ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
> if (ret)
> return ret;
>
> + reg |= MEASURE_PERIOD;
> +
> if (priv->num_sensors > 1)
> reg |= mask | SLP_CLK_ENA | EN;
> else
>

--
Warm Regards
Thara

\
 
 \ /
  Last update: 2021-03-19 14:13    [W:2.374 / U:2.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site