lkml.org 
[lkml]   [2021]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v11 9/9] dt-bindings: thermal: tsens: Document ipq8064 bindings
Date
Document the use of bindings used for msm8960 tsens based devices.
msm8960 use the same gcc regs and is set as a child of the qcom gcc.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/thermal/qcom-tsens.yaml | 56 ++++++++++++++++---
1 file changed, 48 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 95462e071ab4..1785b1c75a3c 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -19,6 +19,11 @@ description: |
properties:
compatible:
oneOf:
+ - description: msm9860 TSENS based
+ items:
+ - enum:
+ - qcom,ipq8064-tsens
+
- description: v0.1 of TSENS
items:
- enum:
@@ -73,7 +78,9 @@ properties:
maxItems: 2
items:
- const: calib
- - const: calib_sel
+ - enum:
+ - calib_backup
+ - calib_sel

"#qcom,sensors":
description:
@@ -88,12 +95,20 @@ properties:
Number of cells required to uniquely identify the thermal sensors. Since
we have multiple sensors this is set to 1

+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - "#thermal-sensor-cells"
+ - "#qcom,sensors"
+
allOf:
- if:
properties:
compatible:
contains:
enum:
+ - qcom,ipq8064-tsens
- qcom,msm8916-tsens
- qcom,msm8974-tsens
- qcom,msm8976-tsens
@@ -114,17 +129,42 @@ allOf:
interrupt-names:
minItems: 2

-required:
- - compatible
- - reg
- - "#qcom,sensors"
- - interrupts
- - interrupt-names
- - "#thermal-sensor-cells"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,tsens-v0_1
+ - qcom,tsens-v1
+ - qcom,tsens-v2
+
+ then:
+ required:
+ - reg

additionalProperties: false

examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ // Example msm9860 based SoC (ipq8064):
+ gcc: clock-controller {
+
+ /* ... */
+
+ tsens: thermal-sensor {
+ compatible = "qcom,ipq8064-tsens";
+
+ nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
// Example 1 (legacy: for pre v1 IP):
--
2.30.2
\
 
 \ /
  Last update: 2021-03-19 01:54    [W:0.337 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site