lkml.org 
[lkml]   [2021]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/8] net: xilinx: emaclite: Use platform_get_irq() to get the interrupt
Date
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 0815de581c7f..519599480b15 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1133,14 +1133,11 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
lp->ndev = ndev;

/* Get IRQ for the device */
- res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(dev, "no IRQ found\n");
- rc = -ENXIO;
+ rc = platform_get_irq(ofdev, 0);
+ if (rc < 0)
goto error;
- }

- ndev->irq = res->start;
+ ndev->irq = rc;

res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
lp->base_addr = devm_ioremap_resource(&ofdev->dev, res);
--
2.17.1
\
 
 \ /
  Last update: 2021-12-24 20:28    [W:1.772 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site