lkml.org 
[lkml]   [2021]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/8] ethernet: netsec: Use platform_get_irq() to get the interrupt
Date
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/net/ethernet/socionext/netsec.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index 25dcd8eda5fc..556bd353dd42 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -1977,11 +1977,12 @@ static int netsec_register_mdio(struct netsec_priv *priv, u32 phy_addr)

static int netsec_probe(struct platform_device *pdev)
{
- struct resource *mmio_res, *eeprom_res, *irq_res;
+ struct resource *mmio_res, *eeprom_res;
struct netsec_priv *priv;
u32 hw_ver, phy_addr = 0;
struct net_device *ndev;
int ret;
+ int irq;

mmio_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mmio_res) {
@@ -1995,11 +1996,9 @@ static int netsec_probe(struct platform_device *pdev)
return -ENODEV;
}

- irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq_res) {
- dev_err(&pdev->dev, "No IRQ resource found.\n");
- return -ENODEV;
- }
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;

ndev = alloc_etherdev(sizeof(*priv));
if (!ndev)
@@ -2010,7 +2009,7 @@ static int netsec_probe(struct platform_device *pdev)
spin_lock_init(&priv->reglock);
SET_NETDEV_DEV(ndev, &pdev->dev);
platform_set_drvdata(pdev, priv);
- ndev->irq = irq_res->start;
+ ndev->irq = irq;
priv->dev = &pdev->dev;
priv->ndev = ndev;

--
2.17.1
\
 
 \ /
  Last update: 2021-12-24 20:27    [W:0.142 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site