lkml.org 
[lkml]   [2021]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/8] ath10k: Use platform_get_irq() to get the interrupt
Date
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/net/wireless/ath/ath10k/snoc.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 9513ab696fff..681e1abe7440 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1306,13 +1306,10 @@ static int ath10k_snoc_resource_init(struct ath10k *ar)
}

for (i = 0; i < CE_COUNT; i++) {
- res = platform_get_resource(ar_snoc->dev, IORESOURCE_IRQ, i);
- if (!res) {
- ath10k_err(ar, "failed to get IRQ%d\n", i);
- ret = -ENODEV;
- goto out;
- }
- ar_snoc->ce_irqs[i].irq_line = res->start;
+ ret = platform_get_irq(ar_snoc->dev, i);
+ if (ret < 0)
+ return ret;
+ ar_snoc->ce_irqs[i].irq_line = ret;
}

ret = device_property_read_u32(&pdev->dev, "qcom,xo-cal-data",
@@ -1323,10 +1320,8 @@ static int ath10k_snoc_resource_init(struct ath10k *ar)
ath10k_dbg(ar, ATH10K_DBG_SNOC, "xo cal data %x\n",
ar_snoc->xo_cal_data);
}
- ret = 0;

-out:
- return ret;
+ return 0;
}

static void ath10k_snoc_quirks_init(struct ath10k *ar)
--
2.17.1
\
 
 \ /
  Last update: 2021-12-24 20:28    [W:0.142 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site