lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net 0/4] Fix bit timings for m_can_pci (Elkhart Lake)
Date
This series fixes two issues we found with the setup of the CAN
controller of Intel Elkhart Lake CPUs:

- Patch 1 fixes an incorrect reference clock rate, which caused the
configured and the actual bitrate always to differ by a factor of 2.
- Patches 2-4 fix a deviation between the driver and the documentation.
We did not actually see issues without these patches, however we did
only superficial testing and may just not have hit the specific
bittiming values that violate the documented limits.


Matthias Schiffer (4):
can: m_can: pci: fix incorrect reference clock rate
Revert "can: m_can: remove support for custom bit timing"
can: m_can: make custom bittiming fields const
can: m_can: pci: use custom bit timings for Elkhart Lake

drivers/net/can/m_can/m_can.c | 24 ++++++++++++----
drivers/net/can/m_can/m_can.h | 3 ++
drivers/net/can/m_can/m_can_pci.c | 48 ++++++++++++++++++++++++++++---
3 files changed, 65 insertions(+), 10 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2021-11-15 10:22    [W:0.101 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site