lkml.org 
[lkml]   [2021]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/15] irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
Date
Going forward we want architecture/entry code to perform all the
necessary work to enter/exit IRQ context, with irqchip code merely
handling the mapping of the interrupt to any handler(s). Among other
reasons, this is necessary to consistently fix some longstanding issues
with the ordering of lockdep/RCU/tracing instrumentation which many
architectures get wrong today in their entry code.

Importantly, rcu_irq_{enter,exit}() must be called precisely once per
IRQ exception, so that rcu_is_cpu_rrupt_from_idle() can correctly
identify when an interrupt was taken from an idle context which must be
explicitly preempted. Currently handle_domain_irq() calls
rcu_irq_{enter,exit}() via irq_{enter,exit}(), but entry code needs to
be able to call rcu_irq_{enter,exit}() earlier for correct ordering
across lockdep/RCU/tracing updates for sequences such as:

lockdep_hardirqs_off(CALLER_ADDR0);
rcu_irq_enter();
trace_hardirqs_off_finish();

To permit each architecture to be converted to the new style in turn,
this patch adds a new CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY selected by all
current users of HANDLE_DOMAIN_IRQ, which gates the existing behaviour.
When CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY is not selected,
handle_domain_irq() requires entry code to perform the
irq_{enter,exit}() work, with an explicit check for this matching the
style of handle_domain_nmi().

Subsequent patches will:

1) Add the necessary IRQ entry accounting to each architecture in turn,
dropping CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY from that architecture's
Kconfig.

2) Remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY once it is no longer
selected.

3) Convert irqchip drivers to consistently use
generic_handle_domain_irq() rather than handle_domain_irq().

4) Remove handle_domain_irq() and CONFIG_HANDLE_DOMAIN_IRQ.

... which should leave us with a clear split of responsiblity across the
entry and irqchip code, making it possible to perform additional
cleanups and fixes for the aforementioned longstanding issues with entry
code.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
arch/arm/Kconfig | 1 +
arch/arm64/Kconfig | 1 +
arch/csky/Kconfig | 1 +
arch/openrisc/Kconfig | 1 +
arch/riscv/Kconfig | 1 +
kernel/irq/Kconfig | 4 ++++
kernel/irq/irqdesc.c | 30 ++++++++++++++++++++++++++++++
7 files changed, 39 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fc196421b2ce..f18aff82c27b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -65,6 +65,7 @@ config ARM
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select HANDLE_DOMAIN_IRQ
+ select HANDLE_DOMAIN_IRQ_IRQENTRY
select HARDIRQS_SW_RESEND
select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 5c7ae4c3954b..553239a5a5f7 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -134,6 +134,7 @@ config ARM64
select GENERIC_GETTIMEOFDAY
select GENERIC_VDSO_TIME_NS
select HANDLE_DOMAIN_IRQ
+ select HANDLE_DOMAIN_IRQ_IRQENTRY
select HARDIRQS_SW_RESEND
select HAVE_MOVE_PMD
select HAVE_MOVE_PUD
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 9d4d898df76b..45f03f674a61 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -18,6 +18,7 @@ config CSKY
select DMA_DIRECT_REMAP
select IRQ_DOMAIN
select HANDLE_DOMAIN_IRQ
+ select HANDLE_DOMAIN_IRQ_IRQENTRY
select DW_APB_TIMER_OF
select GENERIC_IOREMAP
select GENERIC_LIB_ASHLDI3
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index e804026b4797..ed783a67065e 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -14,6 +14,7 @@ config OPENRISC
select OF_EARLY_FLATTREE
select IRQ_DOMAIN
select HANDLE_DOMAIN_IRQ
+ select HANDLE_DOMAIN_IRQ_IRQENTRY
select GPIOLIB
select HAVE_ARCH_TRACEHOOK
select SPARSE_IRQ
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 301a54233c7e..740653063a56 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -63,6 +63,7 @@ config RISCV
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL if MMU && 64BIT
select HANDLE_DOMAIN_IRQ
+ select HANDLE_DOMAIN_IRQ_IRQENTRY
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index fbc54c2a7f23..897dfc552bb0 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -100,6 +100,10 @@ config IRQ_MSI_IOMMU
config HANDLE_DOMAIN_IRQ
bool

+# Legacy behaviour; architectures should call irq_{enter,exit}() themselves
+config HANDLE_DOMAIN_IRQ_IRQENTRY
+ bool
+
config IRQ_TIMINGS
bool

diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index b07d0e1552bc..c8bc856c5e9f 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -677,6 +677,7 @@ int generic_handle_domain_irq(struct irq_domain *domain, unsigned int hwirq)
EXPORT_SYMBOL_GPL(generic_handle_domain_irq);

#ifdef CONFIG_HANDLE_DOMAIN_IRQ
+#ifdef CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
/**
* handle_domain_irq - Invoke the handler for a HW irq belonging to a domain,
* usually for a root interrupt controller
@@ -700,6 +701,35 @@ int handle_domain_irq(struct irq_domain *domain,
set_irq_regs(old_regs);
return ret;
}
+#else
+/**
+ * handle_domain_irq - Invoke the handler for a HW irq belonging to a domain,
+ * usually for a root interrupt controller
+ * @domain: The domain where to perform the lookup
+ * @hwirq: The HW irq number to convert to a logical one
+ * @regs: Register file coming from the low-level handling code
+ *
+ * This function must be called from an IRQ context.
+ *
+ * Returns: 0 on success, or -EINVAL if conversion has failed
+ */
+int handle_domain_irq(struct irq_domain *domain,
+ unsigned int hwirq, struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ int ret;
+
+ /*
+ * IRQ context needs to be setup earlier.
+ */
+ WARN_ON(!in_irq());
+
+ ret = generic_handle_domain_irq(domain, hwirq);
+
+ set_irq_regs(old_regs);
+ return ret;
+}
+#endif

/**
* handle_domain_nmi - Invoke the handler for a HW irq belonging to a domain
--
2.11.0
\
 
 \ /
  Last update: 2021-10-21 20:04    [W:0.301 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site