lkml.org 
[lkml]   [2020]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC v2 07/11] net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable
Date
The timing adjustment clock will need similar logic as the RGMII clock:
It has to be enabled in the driver conditionally and when the driver is
unloaded it should be disabled again. Extract the existing code for the
RGMII clock into a new function so it can be re-used.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../ethernet/stmicro/stmmac/dwmac-meson8b.c | 23 +++++++++++++++----
1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 41f3ef6bea66..d31f79c455de 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -266,6 +266,22 @@ static int meson_axg_set_phy_mode(struct meson8b_dwmac *dwmac)
return 0;
}

+static int meson8b_devm_clk_prepare_enable(struct meson8b_dwmac *dwmac,
+ struct clk *clk)
+{
+ int ret;
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ return ret;
+
+ devm_add_action_or_reset(dwmac->dev,
+ (void(*)(void *))clk_disable_unprepare,
+ dwmac->rgmii_tx_clk);
+
+ return 0;
+}
+
static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
{
int ret;
@@ -299,16 +315,13 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
return ret;
}

- ret = clk_prepare_enable(dwmac->rgmii_tx_clk);
+ ret = meson8b_devm_clk_prepare_enable(dwmac,
+ dwmac->rgmii_tx_clk);
if (ret) {
dev_err(dwmac->dev,
"failed to enable the RGMII TX clock\n");
return ret;
}
-
- devm_add_action_or_reset(dwmac->dev,
- (void(*)(void *))clk_disable_unprepare,
- dwmac->rgmii_tx_clk);
break;

case PHY_INTERFACE_MODE_RMII:
--
2.26.2
\
 
 \ /
  Last update: 2020-04-29 22:18    [W:0.218 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site