lkml.org 
[lkml]   [2020]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC v2 07/11] net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable
On Wed, Apr 29, 2020 at 10:16:40PM +0200, Martin Blumenstingl wrote:
> The timing adjustment clock will need similar logic as the RGMII clock:
> It has to be enabled in the driver conditionally and when the driver is
> unloaded it should be disabled again. Extract the existing code for the
> RGMII clock into a new function so it can be re-used.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> .../ethernet/stmicro/stmmac/dwmac-meson8b.c | 23 +++++++++++++++----
> 1 file changed, 18 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> index 41f3ef6bea66..d31f79c455de 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> @@ -266,6 +266,22 @@ static int meson_axg_set_phy_mode(struct meson8b_dwmac *dwmac)
> return 0;
> }
>
> +static int meson8b_devm_clk_prepare_enable(struct meson8b_dwmac *dwmac,
> + struct clk *clk)
> +{
> + int ret;
> +
> + ret = clk_prepare_enable(clk);
> + if (ret)
> + return ret;
> +
> + devm_add_action_or_reset(dwmac->dev,
> + (void(*)(void *))clk_disable_unprepare,
> + dwmac->rgmii_tx_clk);
> +
> + return 0;
> +}

I'm surprised this does not exist in the core. It looks like there was
some discussion about this, but nothing merged.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2020-05-01 17:38    [W:1.144 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site