lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v3 08/20] mtd: spi-nor: Split spi_nor_init_params()
From
Date


On 26/08/19 5:38 PM, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> Add functions to delimit what the chunks of code do:
>
> static void spi_nor_init_params()
> {
> spi_nor_info_init_params()
> spi_nor_manufacturer_init_params()
> spi_nor_sfdp_init_params()
> }
>
> Add descriptions to all methods.
>
> spi_nor_init_params() becomes of type void, as all its children
> return void.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> ---
> v3: rename spi_nor_legacy_init_params() to spi_nor_info_init_params()


Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

Minor nits below...

[...]
>
> +/**
> + * spi_nor_init_params() - Initialize the flash's parameters and settings.
> + * @nor: pointer to a 'struct spi-nor'.
> + *
> + * The flash parameters and settings are initialized based on a sequence of
> + * calls that are ordered by priority:
> + *
> + * 1/ Default flash parameters initialization. The initializations are done
> + * based on nor->info data:
> + * spi_nor_info_init_params()
> + *
> + * which can be overwritten by:
> + * 2/ Manufacturer flash parameters initialization. The initializations are
> + * done based on MFR register, or when the decisions can not be done solely
> + * based on MFR, by using specific flash_info tweeks, ->default_init():
> + * spi_nor_manufacturer_init_params()
> + *
> + * which can be overwritten by:
> + * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
> + * should be more accurate that the above.
> + * spi_nor_sfdp_init_params()
> + *
> + * Please not that there is a ->post_bfpt() fixup hook that can overwrite the

s/not/note

> + * flash parameters and settings imediately after parsing the Basic Flash

s/imediately/immediately

> + * Parameter Table.
> + */
> +static void spi_nor_init_params(struct spi_nor *nor)
> +{
> + spi_nor_info_init_params(nor);
>
> spi_nor_manufacturer_init_params(nor);
>
> - if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
> - !(info->flags & SPI_NOR_SKIP_SFDP)) {
> - struct spi_nor_flash_parameter sfdp_params;
> -
> - memcpy(&sfdp_params, params, sizeof(sfdp_params));
> -
> - if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
> - nor->addr_width = 0;
> - nor->flags &= ~SNOR_F_4B_OPCODES;
> - } else {
> - memcpy(params, &sfdp_params, sizeof(*params));
> - }
> - }
> -
> - return 0;
> + if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
> + !(nor->info->flags & SPI_NOR_SKIP_SFDP))
> + spi_nor_sfdp_init_params(nor);
> }
>
> static int spi_nor_select_read(struct spi_nor *nor,
> @@ -4670,10 +4715,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> nor->info->flags & SPI_NOR_HAS_LOCK)
> nor->clear_sr_bp = spi_nor_clear_sr_bp;
>
> - /* Parse the Serial Flash Discoverable Parameters table. */
> - ret = spi_nor_init_params(nor);
> - if (ret)
> - return ret;
> + /* Init flash parameters based on flash_info struct and SFDP */
> + spi_nor_init_params(nor);
>
> if (!mtd->name)
> mtd->name = dev_name(dev);
>

--
Regards
Vignesh

\
 
 \ /
  Last update: 2019-08-27 08:00    [W:0.360 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site