lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v3 00/20] mtd: spi-nor: move manuf out of the core
From
Date


On 26/08/19 5:38 PM, Tudor.Ambarus@microchip.com wrote:
> From: Tudor Ambarus <tudor.ambarus@microchip.com>
[...]
>
> Tested on sst26vf064b with atmel-quadspi SPIMEM driver.
>

Tested s25fl256s, mx66l51235l with ti-qspi and s25fl512s with
cadence-quadspi. n25q128a13 with legacy 1 bit SPI controller.

> Boris Brezillon (7):
> mtd: spi-nor: Add a default_init() fixup hook for gd25q256
> mtd: spi-nor: Create a ->set_4byte() method
> mtd: spi-nor: Rework the SPI NOR lock/unlock logic
> mtd: spi-nor: Add post_sfdp() hook to tweak flash config
> mtd: spi-nor: Add spansion_post_sfdp_fixups()
> mtd: spi-nor: Add a ->convert_addr() method
> mtd: spi-nor: Add the SPI_NOR_XSR_RDY flag
>
> Tudor Ambarus (13):
> mtd: spi-nor: Regroup flash parameter and settings
> mtd: spi-nor: Use nor->params
> mtd: spi-nor: Drop quad_enable() from 'struct spi-nor'
> mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'
> mtd: spi-nor: Add default_init() hook to tweak flash parameters
> mtd: spi_nor: Move manufacturer quad_enable() in ->default_init()
> mtd: spi-nor: Split spi_nor_init_params()
> mtd: spi_nor: Add a ->setup() method
> mtd: spi-nor: Add s3an_post_sfdp_fixups()
> mtd: spi-nor: Bring flash params init together
> mtd: spi_nor: Introduce spi_nor_set_addr_width()
> mtd: spi-nor: Introduce spi_nor_get_flash_info()
> mtd: spi-nor: Rework the disabling of block write protection
>
> drivers/mtd/spi-nor/spi-nor.c | 1304 +++++++++++++++++++++++------------------
> include/linux/mtd/spi-nor.h | 298 +++++++---
> 2 files changed, 927 insertions(+), 675 deletions(-)
>

--
Regards
Vignesh

\
 
 \ /
  Last update: 2019-08-27 07:33    [W:0.180 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site